forhuskers
11-07-2012, 09:15 PM
Has anyone scuffed up a Hy-Road with a white 7445 scotchbrite pad? This is approximately equal to 2500 Abralon. Right now my ball is OOB with a 1500 polished finish. I was wondering what the reaction change would be. I have a sanded 1000 T-Road, the polished 1500 Hy-Road, a matte 4000 Alpha-max and a polished 4000 Columbia 300 Burst. Would it be beneficial to even consider doing it? Our THS is oil to 44' buffed out another 2 feet.
I'm still trying to learn all of the new ball finishes and what they do or should do.
billf
11-07-2012, 09:19 PM
With or without polish after the sanding? With it will go longer. Without probably close to the same but real dependent on how dry the heads and mid-lane are.
75lockwood
11-07-2012, 09:46 PM
Has anyone scuffed up a Hy-Road with a white 7445 scotchbrite pad? This is approximately equal to 2500 Abralon. Right now my ball is OOB with a 1500 polished finish. I was wondering what the reaction change would be. I have a sanded 1000 T-Road, the polished 1500 Hy-Road, a matte 4000 Alpha-max and a polished 4000 Columbia 300 Burst. Would it be beneficial to even consider doing it? Our THS is oil to 44' buffed out another 2 feet.
I'm still trying to learn all of the new ball finishes and what they do or should do.
if you plan on doing this i would say take it to a pro shop and use a spinner, while the scotchbrite pad may be close to the 2500 abralon, doing it by hand would cause inconsistency in the sanding