i just noticed

[noeymc]

my strike ball my thumb slids out early and my spare ball my thumb stays in a bit longer they are drilled the same size what would make this happen

[J Anderson]

my strike ball my thumb slids out early and my spare ball my thumb stays in a bit longer they are drilled the same size what would make this happen

The pitch of the hole can affect how easily the thumb comes out.

For most spares there's no need for a lot of revs, so its not a big deal if the thumb comes out at almost the same time as the fingers.

Or are you saying that your thumb is coming out too soon when using your strike ball?

[noeymc]

its half way out but the time i start my back swing

[J Anderson]

its half way out but the time i start my back swing

That does sound like a problem. Hopefully one of the guys who knows more about ball drilling can chime in.

[noeymc]

i no right

[billf]

They are either not the same or the pitch is different. I would say extremely different but that is a relative term.

[noeymc]

i am not going to lie i dont know what that means sorry :(


edit:

would bowling tape help? the kind u put in the ball

[Zothen]

Start with a piece of tape in thumb hole and see if that helps. Also put a piece of thumb tape on back of your thumb as well.

Zothen

[J Anderson]

i am not going to lie i dont know what that means sorry :(


edit:

would bowling tape help? the kind u put in the ball

If tape helps, and you are correct that the hole sizes are exactly the same, both holes are to large and you're probably having to grip both ball more than you should.

Tape is a cheap fix, there is one school of thought that the hole should be sized so that you need one or two pieces of tape normally. That way, if your thumb swells you can take a piece or two out, or if it shrinks you can add.

[noeymc]

one drilled in summer and the driller just copied my other ball for my spare ball