Fill out layout sheet based on ball (without proper tools)

[75lockwood]

Hey all, i was wondering if it was possible to fill out the layout sheet using one of my balls but without the proper layout tools used by a proshop

742

if not, do you know anywhere to get the tools cheaply? i don't need the top of the line $90 Pro-Sect.

Thanks in advance!

[Zothen]

No,unless you have a layout sheet that has all your stats on it. The pro shop usually fills it out when they fit you for a ball or they get measurements from an exsiting ball.

Zothen

[75lockwood]

they get measurements from an existing ball.

that's what i'm trying to do, i would like to be able to fill out the sheet based on the layout on my ball, i was thinking that i could do most of it with a tape measure, but want to insure in is completely accurate. I guess doing it next time im at the pro shop would be the best option....

[got_a_300]

Yes you will need the proper tools if you want to lay out
your drilling specs. You can not get the proper pitches on
your fingers and thumb with a tape measure yes you might
get the span close but not the correct pitches.

The best thing I can recommend is the next time you're at
the Pro shop is to ask for a copy of you drilling specs and
if they don't want to give you a copy then I'd have to say
to just find yourself a new Pro shop to deal with.

[Mike White]

With a little creative thinking, and math skills, you can measure pitches with a tape measure.

[75lockwood]

Yes you will need the proper tools if you want to lay out
your drilling specs. You can not get the proper pitches on
your fingers and thumb with a tape measure yes you might
get the span close but not the correct pitches.

The best thing I can recommend is the next time you're at
the Pro shop is to ask for a copy of you drilling specs and
if they don't want to give you a copy then I'd have to say
to just find yourself a new Pro shop to deal with.

Fair enough, i will do this.


With a little creative thinking, and math skills, you can measure pitches with a tape measure.

i can think of the math to do this, however i would not be confident enough to get a ball drilled off my measurements.

[noeymc]

u can ask your pro shop for your info they should beable to get u a copy of it