bowl1820
04-13-2014, 09:24 PM
1) DV8 Dude
2) Ball Specifications
a) Gross Weight: 15lbs. 5oz.
b) Top Weight: 3 oz.
c) Pin Placement: 3"
d) Coverstock: Class 4F Solid Reactive
e) Core: Symmetrical
RG Max 2.597 @ 15 lbs.
RG Min 2.557 @ 15 lbs.
RG Differential 0.040 @ 15 lbs
f) OOB Surface: 500 Siaair/Royal Compound/Royal Shine
3) Drill Layout/Pattern:
a) Pin to PAP distance: 5”
b) CG to PAP distance: 5”
c) Undrilled 75* X 5" X 35*
d) Pin Over ringfinger
e) CG 1" from centerline, 2.5" pin Buffer
http://i174.photobucket.com/albums/w89/aloarjr810/bowlingballs/DV8-DUDE-Layout_zps7487ea7c.jpg
4) Surface Preparation
a) Surface Type: P800/4000/Royal Compound / Royal Shine
5) Bowler Specifications
a) Right handed
b) Stroker
c) Ball Speed: 17mph off hand
d) Rev rate: Low/Medium rev’s (250rpm)
e) Positive Axis Point (PAP):5 7/8"> 5/8"^
f) About 13 degree axis tilt
6) Lanes
a) Type of lanes (synthetic) Brunswick Pro Anvil
b) Oil pattern Information (Typical House Shot “THS”) Length 41 ft
7) Ball Reaction Characteristics
The Dude has a good smooth reaction, vary controllable. It's clean through the heads, with a nice strong continuous roll. Not a heavy oil ball, it can push a little far on the fresh (depending on the volume you have). It Takes surface changes well, good recovery from the outside and hold in the middle.
A good house shot ball, it doesn't over react when it sees friction. I can easily use it for 3 games during league, It's the first ball out of the bag. It's a good all around ball with a predicable motion and strong when it needs to be.
It would make a good first ball for a beginner or a good benchmark ball.
2) Ball Specifications
a) Gross Weight: 15lbs. 5oz.
b) Top Weight: 3 oz.
c) Pin Placement: 3"
d) Coverstock: Class 4F Solid Reactive
e) Core: Symmetrical
RG Max 2.597 @ 15 lbs.
RG Min 2.557 @ 15 lbs.
RG Differential 0.040 @ 15 lbs
f) OOB Surface: 500 Siaair/Royal Compound/Royal Shine
3) Drill Layout/Pattern:
a) Pin to PAP distance: 5”
b) CG to PAP distance: 5”
c) Undrilled 75* X 5" X 35*
d) Pin Over ringfinger
e) CG 1" from centerline, 2.5" pin Buffer
http://i174.photobucket.com/albums/w89/aloarjr810/bowlingballs/DV8-DUDE-Layout_zps7487ea7c.jpg
4) Surface Preparation
a) Surface Type: P800/4000/Royal Compound / Royal Shine
5) Bowler Specifications
a) Right handed
b) Stroker
c) Ball Speed: 17mph off hand
d) Rev rate: Low/Medium rev’s (250rpm)
e) Positive Axis Point (PAP):5 7/8"> 5/8"^
f) About 13 degree axis tilt
6) Lanes
a) Type of lanes (synthetic) Brunswick Pro Anvil
b) Oil pattern Information (Typical House Shot “THS”) Length 41 ft
7) Ball Reaction Characteristics
The Dude has a good smooth reaction, vary controllable. It's clean through the heads, with a nice strong continuous roll. Not a heavy oil ball, it can push a little far on the fresh (depending on the volume you have). It Takes surface changes well, good recovery from the outside and hold in the middle.
A good house shot ball, it doesn't over react when it sees friction. I can easily use it for 3 games during league, It's the first ball out of the bag. It's a good all around ball with a predicable motion and strong when it needs to be.
It would make a good first ball for a beginner or a good benchmark ball.