PDA

View Full Version : Speed dominant?



Ezeeduzit
02-24-2021, 12:57 PM
Does "speed dominant" mean a bowler with a high ball speed? or could it also apply to someone with a slower speed?
I am 71 years old, use 14lb balls, and my ball speed averages around 12.8 to 13.2 on our lanes. I am also not sure how to "match" my ball speed and rev rate.

J Anderson
02-24-2021, 01:24 PM
Does "speed dominant" mean a bowler with a high ball speed? or could it also apply to someone with a slower speed?
I am 71 years old, use 14lb balls, and my ball speed averages around 12.8 to 13.2 on our lanes. I am also not sure how to "match" my ball speed and rev rate.

Speed dominant refers to the speed relative to the rev rate. At 13 mph you probably aren’t speed dominant most likely balanced or rev dominant.
Generally speaking speed dominant players have a hard time getting the ball to hook in time to hit the pocket. Rev dominant bowlers have to worry about the ball reading too soon.
As for you “matching” your ball speed and rev rate I suppose you could find a coach and work on getting them to match. It’s probably a lot easier to make sure you have the right ball in your hand for the way you throw.

bowl1820
02-25-2021, 07:53 PM
Does "speed dominant" mean a bowler with a high ball speed? or could it also apply to someone with a slower speed?
I am 71 years old, use 14lb balls, and my ball speed averages around 12.8 to 13.2 on our lanes. I am also not sure how to "match" my ball speed and rev rate.

As J Anderson said Speed dominant is referring to your (Off the hand) ball speed higher relative to your balls rev rate. Knowing whether your "Speed" or "Rev" dominant is one bit of info used that can help in determining a layout for a ball.

This is a widely used chart to see if someone is "Matched" or not.

Example if your speed is about 13mph on the monitor, Then your off hand speed probably is about 16 mph (A ball typically loses about 3 mph by the time it reaches the monitor at the pins).

So for you to be "Matched" your revs should be about 250rpm. If the revs are lower you'd be speed dominate, if higher the rev dominate.

https://i.postimg.cc/3wQPrCMV/Ball-Speedvs-Rev-Rate.jpg

Heres how to find your PAP, ball speed, rev rate, axis rotation and axis tilt from Powerhouse

The ball speed and rev chart used in the video is here:
http://media.wix.com/ugd/83be2f_4c23d4a30d4a42918d6e5d4b240d39bd.pdf



http://youtu.be/aicFPNb0YHw