How can I add more revolutions?

[trekker34]

I've been bowling, fairly regularly for about 3 years now but I've never had any coaching (not really sure why).

I recently purchased a 14lb. Storm Victory Road. I'm not a particularly fast bowler, usually around the 12MPH range, and have been looking to add more revolutions. I have watched countless hours of bowling on TV and watched many videos online showing some of the pros and how they release their ball in order to see how they produce so many RPMs. I've never had my RPMs judged but compared to some people I see play, I can tell you that it's not a whole lot. I sometimes see high school kids putting so much torque and revolutions on their ball and I'm always totally dumbfounded on how they can achieve that while making it look so incredibly easy.

I have, since I started, tried to change my technique, but more RPMs have always eluded me. Perhaps I need to hire a coach and take a few lessons. I will at some point do that, however, in the meantime, can anyone offer some advice on how I can accomplish this?

Thank you.

[bowl1820]

Getting a coach is the best option, but until then. take a look at this article of Joe Slowinski's.
Click here for Simple Method to Change the Amount of Revs (http://bowlingknowledge.info/index.php?option=com_content&task=view&id=31&Itemid=62)

Also

Click here for Strong Finger Position One Key to Creating Revs (http://bowlingknowledge.info/index.php?option=com_content&task=view&id=140&Itemid=62)

Here's simple at home drill to practice your release. Take a child's small Nerf football and throw a underhand spiral, it's the same motion you use for creating rev's.

[J Anderson]

You may need to get more speed to go with the increased revs or else the your ball may react too quickly and roll out well before hitting the pins.

[striker12]

well when your on your release you can pull up on your all when your throwing it to give it abit more revs but this way dose hurt abit at the start till u get use to it.

also theres another way you can tuck your pinky in and it will give you more revs recently i have been tucking my pinky and i have gotten alot more revs since i have changed bowling styles.

when i had my old style i had alot of revs when i changed lost alot of those revs and know with tucking my pinky in i have almost gotten themall back but not fully

[JerseyJim]

well when your on your release you can pull up on your all when your throwing it to give it abit more revs but this way dose hurt abit at the start till u get use to it.

also theres another way you can tuck your pinky in and it will give you more revs recently i have been tucking my pinky and i have gotten alot more revs since i have changed bowling styles.

when i had my old style i had alot of revs when i changed lost alot of those revs and know with tucking my pinky in i have almost gotten themall back but not fully

Striker, tucking your pinky just increases your axis tilt slightly which results in a tad more skid. Your ball will react stronger at the break point because it used a bit less energy getting to the break point. It's one of the methods that Joe Slowinski talks about to alter ball reaction.

[bowl1820]

I agree with JerseyJim here also. According to most of articles that talk about it, they say that what your changing most is axis tilt and rotation (now rotation is not the same thing as Rev's).

Also a often overlooked thing when using a tucked pinky, is the ring finger span. You should have it checked, to make sure it's not too long when using the pinky tucked.

[striker12]

well when i tuck my pinky my axis tilt is always the same just my revs are increased but yeah it give alittle more skid and give a strong backend and my ball dose not roll out as much when i tuck my pinky or do alittle lift on the ball eather one my ball never rolls out but when i normal release my ball sometime rolls out cause of not enouph revs

[aussiedave]

Getting a coach is the best option, but until then. take a look at this article of Joe Slowinski's.
Click here for Simple Method to Change the Amount of Revs (http://bowlingknowledge.info/index.php?option=com_content&task=view&id=31&Itemid=62)

Also

Click here for Strong Finger Position One Key to Creating Revs (http://bowlingknowledge.info/index.php?option=com_content&task=view&id=140&Itemid=62)

Here's simple at home drill to practice your release. Take a child's small Nerf football and throw a underhand spiral, it's the same motion you use for creating rev's.

Nice links mate. Thnx.
ad.

[littlelegs]

Speaking from a personal perspective, after spending too much time reading too much crap, I've found a small group of things key to getting my revs to somewhere I'm happier with.

Slightly higher backswing - the problem there though is that I lose accuracy the higher I go, so in my case it is 'slightly'. A big backswing will give me a lot more revs (and is obviously the way many modern power players go) but my ball control suffers hugely.

Keeping my wrist cupped - this is key for me, especially without the huge backswing. If I break my wrist I lose revs as I don't stay underneath the ball. It's also the area that took me longest to get used to doing. A wrist brace for nearly a year was needed to get used to the position. Until then I simply couldn't stop breaking my wrist backwards. Now I have a noticable cupped position on release.

Wrist rotation - timing of the wrist rotation is probably as important for me as the above. When I time it right (just as the ball gets to my ankle) I get good revs. Too early and there's hardly any. It's also worth mentioning that we're talking wrist rotation and not whole arm. There's a huge difference.

Not leaning forward - if you lean forward too much you're simply the wrong side of the ball. Your hand needs to stay underneath the ball for good revs and dipping your head and both shoulders towards the ground makes that almost impossible.

A relaxed arm - this is a must for accuracy too IMHO. However, a relaxed arm and relaxed swing with nature taking its course, helps improve the revs too I find. Muscle it and the revs drop for me (as does the accuracy).

I mention all these as most aticles and guides I found when looking for help are for people who already have a decent rev rate to help them adjust it. I struggled to find much on the real basics and through a LOT of research and trial and error the above all helped me with rotation. Stuff such as finger placement on the ball etc etc helps tweak revs but doesn't really help generate them to start, for those that are rev challenged. Very few articles cover the real basics. I'll also add that key for me over everthing above is timing, especially the rotation at release. Get the timing out and it can hit the revs hard as well as many other aspects of your game.

And finally...watch guys in your league/local alley who can generate good revs. Excluding two handers/shovellers, they'll all usually have one thing in common...their hand is under the ball at release. Pros on TV/video are obviously also worth watching too but I find it easier in real life to get a 'feel' for exactly what people are doing. Most of the above simply helps achieve that and again, as a disclaimer is stuff, 'I' needed to work on to get anything useful going rev wise. Hopefully some of it may help others.

[10-in-the-pit]

I'm a little old school, but I think some other ways to help increase rev's (without seeing how you bowl) is to increase your knee bend to get lower down to the ground. This changes the launch trajectory of the ball. Your arm upon your release should bend at the elbow where your hand follows through on the release. As mentioned previously, this usually is accompanied by an increase in ball speed as well which would probably provide you with some added benefits. I would also have your span rechecked to make sure your ball is drilled properly for you.

[aussiedave]

Speaking from a personal perspective, after spending too much time reading too much crap, I've found a small group of things key to getting my revs to somewhere I'm happier with.

Slightly higher backswing - the problem there though is that I lose accuracy the higher I go, so in my case it is 'slightly'. A big backswing will give me a lot more revs (and is obviously the way many modern power players go) but my ball control suffers hugely.

Keeping my wrist cupped - this is key for me, especially without the huge backswing. If I break my wrist I lose revs as I don't stay underneath the ball. It's also the area that took me longest to get used to doing. A wrist brace for nearly a year was needed to get used to the position. Until then I simply couldn't stop breaking my wrist backwards. Now I have a noticable cupped position on release.

Wrist rotation - timing of the wrist rotation is probably as important for me as the above. When I time it right (just as the ball gets to my ankle) I get good revs. Too early and there's hardly any. It's also worth mentioning that we're talking wrist rotation and not whole arm. There's a huge difference.

Not leaning forward - if you lean forward too much you're simply the wrong side of the ball. Your hand needs to stay underneath the ball for good revs and dipping your head and both shoulders towards the ground makes that almost impossible.

A relaxed arm - this is a must for accuracy too IMHO. However, a relaxed arm and relaxed swing with nature taking its course, helps improve the revs too I find. Muscle it and the revs drop for me (as does the accuracy).

I mention all these as most aticles and guides I found when looking for help are for people who already have a decent rev rate to help them adjust it. I struggled to find much on the real basics and through a LOT of research and trial and error the above all helped me with rotation. Stuff such as finger placement on the ball etc etc helps tweak revs but doesn't really help generate them to start, for those that are rev challenged. Very few articles cover the real basics. I'll also add that key for me over everthing above is timing, especially the rotation at release. Get the timing out and it can hit the revs hard as well as many other aspects of your game.

And finally...watch guys in your league/local alley who can generate good revs. Excluding two handers/shovellers, they'll all usually have one thing in common...their hand is under the ball at release. Pros on TV/video are obviously also worth watching too but I find it easier in real life to get a 'feel' for exactly what people are doing. Most of the above simply helps achieve that and again, as a disclaimer is stuff, 'I' needed to work on to get anything useful going rev wise. Hopefully some of it may help others.

The cupped wrist idea is to help keep your backswing shorter and to theerefore keep your speed down as well.
I prefer the cocked wrist idea. To explain, hold your hand in front of your face, looking at the palm and just lean your hand to the left. That is essentially the cocked wrist. What it does is give more power on the revometer. It's basically the same as over-turning your hand further clockwise but it more comfortable.
This is for the righty btw.
ad.

[littlelegs]

I'm a little old school, but I think some other ways to help increase rev's (without seeing how you bowl) is to increase your knee bend to get lower down to the ground. This changes the launch trajectory of the ball. Your arm upon your release should bend at the elbow where your hand follows through on the release. As mentioned previously, this usually is accompanied by an increase in ball speed as well which would probably provide you with some added benefits. I would also have your span rechecked to make sure your ball is drilled properly for you.

I'll agree there and something I missed. When I'm tired and get lazy with knee bend revs will drop too. For me it seems to be important but I know there are a lot of players out there that can generate revs almost upright. I'm not one of them though.

[littlelegs]

The cupped wrist idea is to help keep your backswing shorter and to theerefore keep your speed down as well.
I prefer the cocked wrist idea. To explain, hold your hand in front of your face, looking at the palm and just lean your hand to the left. That is essentially the cocked wrist. What it does is give more power on the revometer. It's basically the same as over-turning your hand further clockwise but it more comfortable.
This is for the righty btw.
ad.

I'll disagree with you there a little. You can have a big backswing with a cupped wrist, although you'll find many power players are pretty straight with players such as Chris Barnes, even breaking the wrist (unloading) just before the ball leaves the fingers to get a few extra revs. A cupped wrist with everything else the same will keep your hand under the ball more. This is turn will create more lift as your fingers leave. As a rule people probably will end up with a shorter backswing when they cup, but need not do and it isn't the only effect cupping will have.

This doesn't mean you can't generate revs with the hand pretty straight but keeping behind the ball that way is harder and needs everything else just right.

However, I probably empahsized 'cupped' too much. Although I now have a noticable cup it isn't that big and basically it's simply ensuring my wrist isn't breaking, which would (and used to) lead to very little lift. The primary point being made was the hand needs to be under the ball to help get the lift and cupping can and does help with this if you're otherwise having trouble doing so.

And again this was all stuff that made a difference to me the way I bowl. As above, I realize there are players keeping a fairly straight wrist with big hand rotation (from being cocked) at the point of release. Their whole stance and release position usually means the hand is pretty much under the ball though even with the wrist fairly straight.

Also a big yes to the cocked thing. It's part of the wrist rotation at release. Obviously the more you rotate, the more spin you're imparting from doing so and this is perhaps something I should have elaborated on. I think I skipped it a little as for me it was something I'd done from the start but on its own simply was doing very little (mainly due to bad timing and starting the wrist rotation too early). I also find it more of a good adjustment for people having the rest right. For me the exit of the thumb prior to the fingers and decent finger lift gives me a good starting point for revs and my first post highlights the changes I had to make to achieve that. Cocking the wrist more or less simply helps me change the rev rate not so much to generate them in the first place.

[aussiedave]

I'm a little old school, but I think some other ways to help increase rev's (without seeing how you bowl) is to increase your knee bend to get lower down to the ground. This changes the launch trajectory of the ball. Your arm upon your release should bend at the elbow where your hand follows through on the release. As mentioned previously, this usually is accompanied by an increase in ball speed as well which would probably provide you with some added benefits. I would also have your span rechecked to make sure your ball is drilled properly for you.

Haven't heard that one before - or at least explained like that anyway. What do you recommend for back angle/position, or doesn't it have any bearing? I'm thinking a little more upright to help center of gravity and strength?
ad.

[aussiedave]

I'll disagree with you there a little. You can have a big backswing with a cupped wrist, although you'll find many power players are pretty straight with players such as Chris Barnes, even breaking the wrist (unloading) just before the ball leaves the fingers to get a few extra revs. A cupped wrist with everything else the same will keep your hand under the ball more. This is turn will create more lift as your fingers leave. As a rule people probably will end up with a shorter backswing when they cup, but need not do and it isn't the only effect cupping will have.

Hadn't given that enough thought, but it makes sense. Haven't even bothered to try cupping, but will definitely give it a go as I am almost at my wits end.


This doesn't mean you can't generate revs with the hand pretty straight but keeping behind the ball that way is harder and needs everything else just right.

Explains a lot, and pegs me to a tee - I don't think I have everything else perfect, but my buddies tell me my form is sound, even good, but it does leave room for lots of things to go wrong when you think about it.


However, I probably empahsized 'cupped' too much. Although I now have a noticable cup it isn't that big and basically it's simply ensuring my wrist isn't breaking, which would (and used to) lead to very little lift. The primary point being made was the hand needs to be under the ball to help get the lift and cupping can and does help with this if you're otherwise having trouble doing so.

Do you still need to cup if you're going for axis?


Also a big yes to the cocked thing. It's part of the wrist rotation at release. Obviously the more you rotate, the more spin you're imparting from doing so and this is perhaps something I should have elaborated on. I think I skipped it a little as for me it was something I'd done from the start but on its own simply was doing very little (mainly due to bad timing and starting the wrist rotation too early). I also find it more of a good adjustment for people having the rest right. For me the exit of the thumb prior to the fingers and decent finger lift gives me a good starting point for revs and my first post highlights the changes I had to make to achieve that. Cocking the wrist more or less simply helps me change the rev rate not so much to generate them in the first place.[/QUOTE]

Not quite with you there - can you elaborate?
Thanks mate.
ad.

[J Anderson]

Haven't heard that one before - or at least explained like that anyway. What do you recommend for back angle/position, or doesn't it have any bearing? I'm thinking a little more upright to help center of gravity and strength?
ad.

You should finish with your back about 15 degrees forward from plumb. In your finish position you should be able to draw the old imaginary line from your slide foot toes through your knee cap to your shoulder. Too much lean and you lose the leverage that puts revolutions on the ball.

[aussiedave]

You should finish with your back about 15 degrees forward from plumb. In your finish position you should be able to draw the old imaginary line from your slide foot toes through your knee cap to your shoulder. Too much lean and you lose the leverage that puts revolutions on the ball.

Kinda what I figured, but wasn't sure about which angle was optimal.
Thnx.
ad.

[aussiedave]

Slightly higher backswing - the problem there though is that I lose accuracy the higher I go, so in my case it is 'slightly'. A big backswing will give me a lot more revs (and is obviously the way many modern power players go) but my ball control suffers hugely.

Relate to that! I also find that I don't have the strength to hold onto the ball - so lighter ball would be obvious there.


Keeping my wrist cupped - this is key for me, especially without the huge backswing. If I break my wrist I lose revs as I don't stay underneath the ball. It's also the area that took me longest to get used to doing. A wrist brace for nearly a year was needed to get used to the position. Until then I simply couldn't stop breaking my wrist backwards. Now I have a noticable cupped position on release.

It's a shame that wrist injury is the likely result for many from cupping - so don't really want to travel that road.


Wrist rotation - timing of the wrist rotation is probably as important for me as the above. When I time it right (just as the ball gets to my ankle) I get good revs. Too early and there's hardly any. It's also worth mentioning that we're talking wrist rotation and not whole arm. There's a huge difference.

Ah yes - the old "over-rotation" problem, which happens to be my biggest. A wrist guard is the best solution there huh?


Not leaning forward - if you lean forward too much you're simply the wrong side of the ball. Your hand needs to stay underneath the ball for good revs and dipping your head and both shoulders towards the ground makes that almost impossible.

This is one that I will definitely be concentrating on. The way I see it, back position is the foundation of it all - get that right, and the rest often falls into place.


A relaxed arm - this is a must for accuracy too IMHO. However, a relaxed arm and relaxed swing with nature taking its course, helps improve the revs too I find. Muscle it and the revs drop for me (as does the accuracy).

One of two items I will be concentrating on from now on.
Thanks for the reminders.


And finally...watch guys in your league/local alley who can generate good revs. Excluding two handers/shovellers, they'll all usually have one thing in common...their hand is under the ball at release. Pros on TV/video are obviously also worth watching too but I find it easier in real life to get a 'feel' for exactly what people are doing. Most of the above simply helps achieve that and again, as a disclaimer is stuff, 'I' needed to work on to get anything useful going rev wise. Hopefully some of it may help others.

This is the one I hum and ha over - keeping the hand under the ball tends towards rollout for me, so I try for axis to promote skid which then affects my accuracy more. Torn between two ideas!
I appreciate your input Tony - you're one most helpful people I have come across.
ad.

[aussiedave]

Slightly higher backswing - the problem there though is that I lose accuracy the higher I go, so in my case it is 'slightly'. A big backswing will give me a lot more revs (and is obviously the way many modern power players go) but my ball control suffers hugely.

Wrist rotation - timing of the wrist rotation is probably as important for me as the above. When I time it right (just as the ball gets to my ankle) I get good revs. Too early and there's hardly any. It's also worth mentioning that we're talking wrist rotation and not whole arm. There's a huge difference.

Not leaning forward - if you lean forward too much you're simply the wrong side of the ball. Your hand needs to stay underneath the ball for good revs and dipping your head and both shoulders towards the ground makes that almost impossible.

A relaxed arm - this is a must for accuracy too IMHO. However, a relaxed arm and relaxed swing with nature taking its course, helps improve the revs too I find. Muscle it and the revs drop for me (as does the accuracy).

I mention all these as most aticles and guides I found when looking for help are for people who already have a decent rev rate to help them adjust it. I struggled to find much on the real basics and through a LOT of research and trial and error the above all helped me with rotation. Stuff such as finger placement on the ball etc etc helps tweak revs but doesn't really help generate them to start, for those that are rev challenged. Very few articles cover the real basics. I'll also add that key for me over everthing above is timing, especially the rotation at release. Get the timing out and it can hit the revs hard as well as many other aspects of your game.

And finally...watch guys in your league/local alley who can generate good revs. Excluding two handers/shovellers, they'll all usually have one thing in common...their hand is under the ball at release.

Had a league practice today and got 50 more than I did the other night.
I found I could do the relazed arm thing quite easily and I liked the accuracy and control and ease of that action better than trying to force the ball - my revs and hook didn't seem to suffer at all and I preferred the way it hooked.
I also was conscious of my kneebend and back position and was very happy with the result.
Thanks mate!
ad.

[billf]

Aussiedave, it's been about six weeks. How have the changes gone? I understand it was a lot to think about and am curious what has worked for you and how you feel with the result?