I am looking to resurface my Storm Rocket. I see that according to Storm, the process would be:
1. 500-grit pad – Sand firmly for 30 seconds on all four sides.
2. 1000-grit pad – Sand lightly for 20 seconds on all four sides.
3. 2000-grit pad – Sand lightly for 20 seconds on all four sides.
4. 4000-grit pad – Sand lightly for 20 seconds on all four sides.
5. Storm® Step Two™ – Polish lightly for 15 seconds on each side.
I have the pads and the equipment (using the Polish Your Ball system) but not the "Step Two" compound.
Question - Is there an equivalent of the Storm Step Two compound that I can substitute? I ask because the Step Two compound only appears to be available in large quantities (one quart) and would cost more than what I would pay to just bring the ball to a pro shop and pay somebody else to do it.
"If a word in the dictionary were misspelled, how would we know?" - Steven Wright
These are similar , Brunswick Royal Compound, Rough buff (if you can still find any), Brunswick Crown Factory compound, Powerhouse Clean'N Sheen or Smooth, they can be found in small sizes
Turtle Wax's Rubbing compound (the red tub/bottle)
Just use a little at a time to see if you get the surface you want
Right handed Stroker, high track ,about 13 degree axis tilt. PAP is located 5 9/16” over 1 3/4” up.Speed ave. about 14 mph at the pins. Medium rev’s.High Game 300, High series 798
"Talent without training is nothing." Luke Skywalker
Bookmarks