Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 26

Thread: The stinking 7 pin....

  1. #11
    Bowling God billf's Avatar
    Join Date
    Feb 2012
    Location
    Sidney, Ohio
    Posts
    5,982
    Blog Entries
    1
    Chats: 217

    Default

    Quote Originally Posted by martinezsam2495 View Post
    I say you upgrade your ball and get something with more backend hook.
    Why do you say that Sam? We both saw that second video with the 201 game. As you stated earlier a lot of shots were going brooklyn. This is a clear indication of a ball going into the hook phase a tad early and your suggestion is to get a stronger ball? That ball was hooking more than enough.

    @thesheibs, I thing I noticed that you may want to check on your other videos. I spotted this quickly as it's also a key for me. You get lazy at times with your balance arm. I couldn't see your ball well enough to tell if this affects your tilt and rotation as it does mine. For me, when I get lazy with that arm the ball either goes a tad brooklyn and/or doesn't hit the pins with the same kind of authority as usual (loses a touch of drive power). I know you didn't ask but I figured it was worth checking out.
    USBC SILVER CERTIFIED COACH
    Gold Coach Candidate
    Owner/Operator of Bowlerz Score Coaching
    Tweener Rev Rate of 420, Speed 19 mph
    Key Bowling Staff Member
    Key Bowling Coaching Staff

    IBPSIA member
    Former Staff Bowler at www.BowlerX.com

  2. #12
    Ringer
    Join Date
    Jun 2012
    Location
    Maywood, CA
    Posts
    584
    Blog Entries
    1
    Chats: 136

    Default

    Quote Originally Posted by billf View Post
    Why do you say that Sam? We both saw that second video with the 201 game. As you stated earlier a lot of shots were going brooklyn. This is a clear indication of a ball going into the hook phase a tad early and your suggestion is to get a stronger ball? That ball was hooking more than enough.

    @thesheibs, I thing I noticed that you may want to check on your other videos. I spotted this quickly as it's also a key for me. You get lazy at times with your balance arm. I couldn't see your ball well enough to tell if this affects your tilt and rotation as it does mine. For me, when I get lazy with that arm the ball either goes a tad brooklyn and/or doesn't hit the pins with the same kind of authority as usual (loses a touch of drive power). I know you didn't ask but I figured it was worth checking out.
    I meant when he throws his strike ball,

    http://www.youtube.com/watch?v=hSnJZ_kOAcg&feature=plcp
    this video has a perfect example of some of the shots where a backend ball would crush through the pins,

    He was getting nasty splits, which were messing up his game, around 2:26, the ball kept having bad contact,

  3. #13
    Ringer TheSheibs's Avatar
    Join Date
    May 2012
    Location
    Bay Area
    Posts
    341
    Blog Entries
    5
    Chats: 8

    Default

    Billf~I have never had my balance arm go out very far. With how I throw the ball I don't really need a balance arm. Also my left foot doesn't get up off the floor and I bend over just enough to have a smooth release(most of the time). Even my dad and grandfather have never had their balance arm go way out to the side like some of the pros do. If you watch some of the other videos I posted you will see that my left toes are almost always in contact with the floor. The foot sliding over is almost an after thought that happens after I release the ball. If I start sliding it over before I completely release the ball my shoulders end up turned to the left too much and, depending on lane conditions, might not come back to the pocket. So I keep my shoulders square to the lane until after the release.

  4. #14
    Ringer TheSheibs's Avatar
    Join Date
    May 2012
    Location
    Bay Area
    Posts
    341
    Blog Entries
    5
    Chats: 8

    Default

    Quote Originally Posted by J Anderson View Post
    Since most house balls are polyester in theory they should be good spare balls. In practice, since for most serious bowlers that would mean switching from finger tip to conventional grip and back, it doesn't work all that great. You really want each ball that you throw to feel the same. Unless you get real lucky finding a house ball that fits perfect, you will have to exert more grip pressure to keep from dropping it. Then you have to remember to not grip your strike ball. Except for two-handers and no-thumbers its probably not a good idea.

    When I switched from conventional to fingertip I kept using my old ball for spares. Eventually it started to hurt to use the conventional grip and that ball went in the closet.
    Your comment about switching back and forth from balls with a conventional grip and fingertip grip has me thinking about this worn spot I ended up with on the outside of my thumb. I think that has to do with grip pressure and the grip stickers I put in the thumb hole. However before I buy a new spare ball I am going to pull out the grip sticker and apply a new one and see if that fixes. I got it after bowling at a different center and could not get a strike to save my life. So I was using the other ball more.

    Sam~The ball I use primarily is an upgrade from the last ball I was using which was a Ebonite Avenger blue pearl urethane. I don't remember what level ball it is and I couldn't find it on Ebonites' website. So the Freeze Hybrid is a step up since the Avenger is a pretty cheap urethane ball. I think back in the day, new, it was only $60 or something like that. It was also the last ball my Dad bought me. I might upgrade in a few months. I have been eyeing the Brunswick C-system balls.

  5. #15
    Cranker The German Shepherd's Avatar
    Join Date
    May 2012
    Location
    Slate Belt, Pennsylvania USA
    Posts
    945
    Chats: 36

    Default

    Yo Sheibs. I watched your video a couple of times and even reversed and played back after several of your shots trying to count the steps you are taking on the way to the foul line. I t seemed to me that you take a 4 step approach??? If so, i have an idea for you...

    Jay
    I am a proud member of Bowlingboards.com bowling Forums
    IN THE BAG > RG -Hyper Cell Fused, Menace; Storm -Code Black, Reign of Power, Lock; [COLOR=#006400;,Track - Hx-10, [B]"
    High Game/High Series - 299(2)/300(13)/856 (Elmira, NY in 1980); Member of Corning, NY Junior Bowling HOF.
    Tweener; PAP= 4.75 over x .75 up/Tilt 10 degrees/Axis of rotation 40 degrees/Revs = 368 and speed is 16.86 MPH average.

  6. #16
    Bowling God billf's Avatar
    Join Date
    Feb 2012
    Location
    Sidney, Ohio
    Posts
    5,982
    Blog Entries
    1
    Chats: 217

    Default

    Quote Originally Posted by TheSheibs View Post
    Billf~I have never had my balance arm go out very far. With how I throw the ball I don't really need a balance arm. Also my left foot doesn't get up off the floor and I bend over just enough to have a smooth release(most of the time). Even my dad and grandfather have never had their balance arm go way out to the side like some of the pros do. If you watch some of the other videos I posted you will see that my left toes are almost always in contact with the floor. The foot sliding over is almost an after thought that happens after I release the ball. If I start sliding it over before I completely release the ball my shoulders end up turned to the left too much and, depending on lane conditions, might not come back to the pocket. So I keep my shoulders square to the lane until after the release.
    Your slide was fine. I prefer seeing the back foot stay on the floor. Mainly because those that lift it seem to have a tendency to try and over throw. The balance arm however, I wasn't talking about it being straight or bent (that's a preference) but rather the angle or lack there of depending on the throw. The balance arm is important in today's game. It's the other side of the pendulum after all. Just watch and see, the angle of your ball changes depending on which plane you put your balance arm in. Now if you were bowling in their era I could agree more with you constantly comparing your game of today to your father and grandfather's game of yesteryear. The equipment has changed the game. That's a fact, pure and simple. They needed a lot of lift back then. Now we need rotation and tilt. It's not meant as disrespect but it's like comparing Babe Ruth to Reggie Jackson to Barry Bonds. Fun to compare but not fair when the game style they played in was so different.
    USBC SILVER CERTIFIED COACH
    Gold Coach Candidate
    Owner/Operator of Bowlerz Score Coaching
    Tweener Rev Rate of 420, Speed 19 mph
    Key Bowling Staff Member
    Key Bowling Coaching Staff

    IBPSIA member
    Former Staff Bowler at www.BowlerX.com

  7. #17
    Ringer TheSheibs's Avatar
    Join Date
    May 2012
    Location
    Bay Area
    Posts
    341
    Blog Entries
    5
    Chats: 8

    Default

    Quote Originally Posted by The German Shepherd View Post
    Yo Sheibs. I watched your video a couple of times and even reversed and played back after several of your shots trying to count the steps you are taking on the way to the foul line. I t seemed to me that you take a 4 step approach??? If so, i have an idea for you...

    Jay
    Yes, I have a 4 step approach. I played around with a 5 step approach for about three months but never felt comfortable with it and my timing was WAY off. That is why I went back to a 4 step approach. So what's your idea? I only ask because I am willing to try something new AT LEAST once.

  8. #18
    Ringer TheSheibs's Avatar
    Join Date
    May 2012
    Location
    Bay Area
    Posts
    341
    Blog Entries
    5
    Chats: 8

    Default

    Quote Originally Posted by billf View Post
    Your slide was fine. I prefer seeing the back foot stay on the floor. Mainly because those that lift it seem to have a tendency to try and over throw. The balance arm however, I wasn't talking about it being straight or bent (that's a preference) but rather the angle or lack there of depending on the throw. The balance arm is important in today's game. It's the other side of the pendulum after all. Just watch and see, the angle of your ball changes depending on which plane you put your balance arm in. Now if you were bowling in their era I could agree more with you constantly comparing your game of today to your father and grandfather's game of yesteryear. The equipment has changed the game. That's a fact, pure and simple. They needed a lot of lift back then. Now we need rotation and tilt. It's not meant as disrespect but it's like comparing Babe Ruth to Reggie Jackson to Barry Bonds. Fun to compare but not fair when the game style they played in was so different.
    I will have to "play" around with this the next time I go bowling. I just haven't seen the need for using a balance arm. I have been pretty consistent with my throws but I will try some different things next time, like I said. What do you mean by angle depending on the throw? I could use more info about this, i guess.

  9. #19
    Bowling God billf's Avatar
    Join Date
    Feb 2012
    Location
    Sidney, Ohio
    Posts
    5,982
    Blog Entries
    1
    Chats: 217

    Default

    I picture bowlers with like a grid overlayed. It actually helps me when watching live to see the different areas or squares that parts of their bodies go through and end in. With the fact that you sometimes bend your balance arm at the elbow i focused more on the upper arm angle in relation to your shoulder. Just the first shot of each frame I noticed yours was in three different areas. Some times it was parallel to the floor, below parallel and even a few times pulled back further from your upper body. That last one does affect shoulder/upper body rotation. You said that was a bad day and I get that. But what does it look like on a good day? I don't know. I do know I spent a year trying all sorts of stuff to fix my game including a clinic with a Gold and Silver certified coach. After reading and them implementing the article on the balance arm by Joe Slowinski did all the other pieces fall into place. I may generate more torque than you and therefor it affects me more but then again it may be part of why your ball has a different tilt at times.
    Here's the link to the article. I'm sure he can explain it better than I. http://bowlingknowledge.info/images/...09_article.pdf
    USBC SILVER CERTIFIED COACH
    Gold Coach Candidate
    Owner/Operator of Bowlerz Score Coaching
    Tweener Rev Rate of 420, Speed 19 mph
    Key Bowling Staff Member
    Key Bowling Coaching Staff

    IBPSIA member
    Former Staff Bowler at www.BowlerX.com

  10. #20
    Cranker The German Shepherd's Avatar
    Join Date
    May 2012
    Location
    Slate Belt, Pennsylvania USA
    Posts
    945
    Chats: 36

    Default

    Quote Originally Posted by TheSheibs View Post
    Yes, I have a 4 step approach. I played around with a 5 step approach for about three months but never felt comfortable with it and my timing was WAY off. That is why I went back to a 4 step approach. So what's your idea? I only ask because I am willing to try something new AT LEAST once.
    I knew that you had once been a 5 stepper by the way your current approach works. In a 5 step approach you take one step and then do your "push-away" on your second step. After watching your video I noticed that you still push-away on your second step! That gives you three steps to do your push-away and your pendulum swing.

    So, here is what I saw...I saw that your 4 steps are very deliberate but your arm-swing is pretty quick and sometimes lacking in tempo. It is as though your arm still thinks you are doing a 5 step approach while your feet say 4 steps. That being the case, your arm-swing is constantly trying to catch up with your feet! And if this is happening, then you are using too many muscles on the outside of your upper arm and when this happens, your swing has a tendency to flare out or tuck in toward your body.

    Would you be willing to try something new? Then try to do your "push-away" simultaneously as your first step. That means you push the ball away at the same time your LEFT foot moves forward. Check out Parker BohnIII. If I were a leftie, I would want my physical game to look like his. As he takes his first step, he pushes the ball away, his body angle is low and he gets excellent leverage at the foul line.

    To sum up, I think your arm swing is a little erratic and a good way to fix that is to push away with step 1 and let the ball swing more freely and less muscle tension in your upper arm.

    I hope you will try this and let me know how this works for you. It may seem quite uncomfortable to begin with but give it some time. It may mean increased foot tempo, but give it a try...

    Jay
    I am a proud member of Bowlingboards.com bowling Forums
    IN THE BAG > RG -Hyper Cell Fused, Menace; Storm -Code Black, Reign of Power, Lock; [COLOR=#006400;,Track - Hx-10, [B]"
    High Game/High Series - 299(2)/300(13)/856 (Elmira, NY in 1980); Member of Corning, NY Junior Bowling HOF.
    Tweener; PAP= 4.75 over x .75 up/Tilt 10 degrees/Axis of rotation 40 degrees/Revs = 368 and speed is 16.86 MPH average.

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •