Reply With Quotecan you resurface a ball by hand, without a spinner? because i just bought a couple abralon pads
nice tips for the beginer
can you resurface a ball by hand, without a spinner? because i just bought a couple abralon pads
A true resurface (removing all nicks and scratches) would be hard.Originally Posted by AngeloPD
But if your talking about just doing surface adjustments to change the reaction, then yes you can do it by hand.
Right handed Stroker, high track ,about 13 degree axis tilt. PAP is located 5 9/16” over 1 3/4” up.Speed ave. about 14 mph at the pins. Medium rev’s.High Game 300, High series 798
"Talent without training is nothing." Luke Skywalker
yes like bringing the ball back to its original finish
Here's a tip to help prolong the life of the pads. Do it wet. I put my balls in the kitchen sink with the water running over the ball and pads the entire time. It not only makes a better, no sand line finish on the ball it also helps keep debris out of the pads.
USBC SILVER CERTIFIED COACH
Gold Coach Candidate
Owner/Operator of Bowlerz Score Coaching
Tweener Rev Rate of 420, Speed 19 mph
Key Bowling Staff Member
Key Bowling Coaching Staff
IBPSIA member
Former Staff Bowler at www.BowlerX.com
Thanks Bill!
I have used standard window cleaner followed by a wipe with denatured Alcohol. If there is any window cleaner resdue, the alcohol will remove it. It is not listed in the USBC list, but is it okay?, illegal? Okay for at home, but not on the lanes?
I live by three simples rules:
1. Don't ever ask about my business
2. Never discuss business at the table
3. Don't ever side with anyone against the family
The Denatured alcohol is listed under:
COMMERCIAL PRODUCTS APPROVED AT ANYTIME
Denatured alcohol (Ethyl alcohol, denatured)
As for the window cleaner if it's not listed, it would be assumed not approved anytime until it was approved.
Right handed Stroker, high track ,about 13 degree axis tilt. PAP is located 5 9/16” over 1 3/4” up.Speed ave. about 14 mph at the pins. Medium rev’s.High Game 300, High series 798
"Talent without training is nothing." Luke Skywalker
Would urethane balls need as much maintenance since they dont absorb as much oil? I still wipe it off between shots and after games and have cleaned it with diluted rubbing alcohol once
I am a proud member of Bowlingboards.com bowling Forums
Storm Crossroad, Roto Grip Defiant, DV8 Too Reckless, Brunswick Avalanche Urethane
Ball Speed: 18Mph
Rev Rate: 450
Current average: 199
High game: 300
High Series: 769
It's not that they don't absorb as much oil, they just just don't absorb it as fast.
Right handed Stroker, high track ,about 13 degree axis tilt. PAP is located 5 9/16” over 1 3/4” up.Speed ave. about 14 mph at the pins. Medium rev’s.High Game 300, High series 798
"Talent without training is nothing." Luke Skywalker
Posting Permissions
Bookmarks