having problem with my 900 global the nuts

[striker12]

ok i am having a big problem with my 900 global the nuts its drilled the same as all of my newish balls same grips and thumb slugs but the one thing i am having the problem with is when i go to throw it my hand fits in it nicly and perfect its not too tight and not too lose but my problem its a 14lb ball and when i do my backswing it feels like a 16lb ball then i cant get my hand under it and i normaly have my hand cuped threw my whole backswing but then i mess up the throw by being way off target to the right.

another problem is if it ose not feel like a 16lb ball on the backswing it nums out my thumb wher eit feels like i have no thumb and then i cant even throw it cause i have put it on a scale and it says 14lbs all the way around the ball but when i put it in my right side witch is my strong and a 15lb ball in my left hand the nuts feels heavyer and when i switch its still the same the nuts is heavyer feeling.

it has no balance hole on it the pin is maby 1/2in above my fingers but inbetween the fingers i think but im not sur eif its the layout thats giving me the problem or what if anyone can tell me whats the problem with this then that would help cause this ball is a nice ball going down the lane when it dose not hurt at all but im thinking of getting it sanded down to 2000 grit it and put polish on it causes its at 4500 grit due to bowlingball.com and its got way to much length on it soo at 2000grit and abit of polish should make it hook abit sooner i think


heres the 900 globals layouts

900 global the nuts layout 1.jpg


heres my DV8 hell raiser revenge layout for compare(different angle of picture)

hell raiser revevnge drilling layout 1.jpg

and heres a 3rd layout picture for compare the DV8 too reckless(closer angle will look different but its still the same)

too reckless drilling layout 1.jpg

[striker12]

srry about above in the 1 sentance i sead 1/2 inch above fingers i think its alittle farther away im not sure but my best guess is 1/2inch with out a roller also the 900 global and the too reckles layouts are simalure they are both drilled for length.

hope someone can tell me what the problem could be i also use finger protection tape on my thumb forgot to add that srry about not adding this into the first one back on my computer never thought till know to say this and still having problems on my mine and dont feel like turning my moms compute rback on.

[billf]

1. The Revenge is layed out differently. It can't be pin down, the others pin up and be the same layout.
2. Doesn't matter because the layout isn't causing this
3. The scale probably isn't lying. It's a 14lbs ball
4. That leaves the obvious...it's in your head. Unless the grips or thumb are worn out.

[bowl1820]

1. The Revenge is layed out differently. It can't be pin down, the others pin up and be the same layout.
2. Doesn't matter because the layout isn't causing this
3. The scale probably isn't lying. It's a 14lbs ball
4. That leaves the obvious...it's in your head. Unless the grips or thumb are worn out.

I'm with bill here.

I'll say it's the grip, it's loose on your hand and slipping some. So your gripping the ball more, which tenses the muscles and makes it feel heavier.

[striker12]

ok but the grips are all new i got the ball in may and it has done it since then it probly has maby 10games on it.

yes bill the layout is different i mean the drilling the fingers are all the same distance and the thumb to the left is the same distance thats what u ment i sead it wrong i should of sead fingers holes and thumb hole

[billf]

So the span, grip and pitches are the same...gotcha
I would have it all double checked because it's either your nuts or something was drilled wrong. You may not be perfect but I wouldn't classify you as insane.

[striker12]

ok i will ge tit all double checked and see whats is fully wrong with it but that wont be for a few days gotta see if he is going to be up there his normal times or if we still have to call in.

[striker12]

ok just got the stuff sent to me to check the span and everything its all the same only thing different is the thumb slug on the HHR is bigger cause its worn and the nuts its abit snug soo my hand cant slip in it talk to the guy at the proshop caus ei could not figure it out soo he came and got the nuts from me when he came and picked up his stuff but the only thing im thinking it might be is the thumb is drilling inword towards my fingers alittle more then the HHR thats my guess at it but im not fully sure i will hear back from him later to see if he finds anything wrong with it.