Storm Step Two or Polish or Reacta Shine?

[coachkapps]

So I did steps 1-4 but I don't have Storm Step Two product. Can I use Reacta Shine instead? Or just polish? I have both of those.

Thanks!

Resurfacing to a 1500-grit Polished Factory Finish
Resurface to the original factory finish using a ball spinner.
1. 500-grit Abralon® - Sand for 30 seconds on all four sides with firm pressure.
2. 1000-grit Abralon® - Sand for 20 seconds on all four sides with light pressure.
3. 2000-grit Abralon® - Sand for 20 seconds on all four sides with light pressure.
4. 4000-grit Abralon® - Sand for 20 seconds on all four sides with light pressure.
5. Storm Step Two™ - Polish lightly for 15 seconds each side.

[Zothen]

I would say you could use either polish or shine.

Zothen

[coachkapps]

I used Reacta Shine. Ball looks like new. I had about 50+ games on it so it was time for a resurface.

[BoomGoesTheDynomite]

any kind of polish should work it doesn't have to be storm stuff

[bowl1820]

You can substitute Rough Buff for Storm Step Two