Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Need a spare ball, was thinking a Hammer Blue in 14lbs...

  1. #1

    Default Need a spare ball, was thinking a Hammer Blue in 14lbs...

    Definitely need a spare ball. I can clean up spares on the left side of the lane (7 pin, etc.) but the stuff on the right side I have been finding it difficult with the hook on the Terror. If I only need to throw at the 10 pin or other variation on that side once per game then it's not easy to get a good read on what to expect.

    I currently have a 16lb. Hammer Blue (urethane) that I used back in my Y.A.B.A days (late 80's early 90's) but since going to a 14lb. ball with my DV8 I now need to switch to a 14lb. spare ball too.

    My first thought was to just buy another Hammer Blue in 14lbs. and be done with it but, now I'm wondering if I should look at what other options there are.

    So what say ye?

  2. #2
    Bowling God billf's Avatar
    Join Date
    Feb 2012
    Location
    Sidney, Ohio
    Posts
    5,982
    Blog Entries
    1
    Chats: 217

    Default

    If and only if, you have the ability to flatten out your wrist for a straight(er) ball then get a urethane. If not, get a plastic ball (Zombie spare )
    USBC SILVER CERTIFIED COACH
    Gold Coach Candidate
    Owner/Operator of Bowlerz Score Coaching
    Tweener Rev Rate of 420, Speed 19 mph
    Key Bowling Staff Member
    Key Bowling Coaching Staff

    IBPSIA member
    Former Staff Bowler at www.BowlerX.com

  3. #3

    Default

    I use urethane ball for a single 10 pin spare. Sometimes my old school black hammer and my seismic desperado LE. I can get it with a reactive ball, but its not a sure thing. I flatten my wrist and create a little more angle by moving left 10 boards with my feet. Works well for me, I can get it 9 out of 10 times with a urethane. Never had any luck with the plastic and in my opinion they feel like junk in my hand.

  4. #4

    Default

    After I got my Rhino Teal the Hammer was relegated to spare duty and that's all I really needed it for back then. I had no trouble flattening out the wrist, I'm sure I can still do that which is the reason why I figured I would just get a lighter weight version of the same ball since I'm comfortable and experienced with it already. Plus if I run into some really dry lanes I can always bust out the Hammer and leave the Terror in the bag (I really don't want to need to carry 3 balls).

  5. #5
    High Roller 75lockwood's Avatar
    Join Date
    Sep 2012
    Location
    Markham Ontario
    Posts
    2,083
    Chats: 723

    Default

    Getting a spare ball would be a good idea, i plan on getting one very soon, in the mean time in order to completely kill the hook on my marauder i break my wrist down, and almost throw a back up ball, the ball doesn't hook left to right, but it kills and hook i would have had
    High Game: 246 (300 soon)
    High Series: 627


    In The Bag: DV8 MARAUDER, Brunswick Nexxxus, Brunswick T Zone
    USBC Level I Certified Coach
    Youth Bowling Canada Member


    I am a proud member of http://BowlingIntel.com bowling Forums


    TONIGHT WE BOWL! DV8 DAMN GOOD BOWLING

  6. #6
    High Roller striker12's Avatar
    Join Date
    Jan 2012
    Location
    kingston, ontario
    Posts
    2,272
    Chats: 891

    Default

    i got a spare ball and i only manly use to to hit splits all over the lane but when im going to hit 10pins i started useing my track 716T because i straighten out my wrist and i can put my revs on it still and it dose not hook as much but the thing i do is i open the angle of the shot to hitting the 10pin but i do aim dead on the 10pin i just to the right side of the 10pin just in case it hooks on me it will still hit the 10pin and if it dose not hook it will skim the 10pin and still knock it over.
    I am a proud member of Bowlingboards.com bowling Forums

    In bag- , storm iq tour pearl , columbia 300 white dot, Brunswick meanstreak brawler, 900 global network, roto-grip rumble, DV8 nightmare


    youth bowling Canada member

    high game: 300
    high series: 699

    this season high Game: 249
    this season high Series: 618

  7. #7
    Pin Crusher Hammer's Avatar
    Join Date
    Oct 2012
    Location
    IL
    Posts
    1,191
    Chats: 0

    Default

    I have a Blue Hammer urethane ball and have no trouble going after the 7 pin without hooking at it. What I do is break my wrist a little and when I release the ball I straighten out my fingertips and let my thumb and fingers get out of the ball at the same time. This way I do not put any lift on the ball so no hook. It slides through the heavy part of the oil and goes pretty straight. When I need a strike shot I can hit it with revs and get a nice controlled arc to the pocket. I am left handed and got this ball for the dry conditions on THS at our bowling center. So for me it is good as a spare ball and strike ball.

  8. #8

    Default

    I have the new Blue Hammer, its the ball I used for about six months. Really like how predictable it is, especially while I was learning to throw a hook. It was one the first fingertip balls I had bought new and had drilled to my hand. Once I leaned how to hook(still learning consistency actually), I then started working on flattening my wrist to throw at the 10 pin spare. I can use the blue hammer, but I found better success with the old urethane Hammers. The only time I switch to the old hammer is for the 10 pin spare. I can just use the ball I am throwing for strikes to pick up the other spares.

    At the house where I bowl league and the majority of practice. The lane oil is too much for the blue hammer, I have switched to a medium oil ball. I still use the blue during third games and some burned up conditions.

  9. #9

    Default

    Another question: What would be the difference between say a Hammer Blue and a DV8 Misfit?

    Would the Misfit have too much potential to hook versus the Hammer Blue?

  10. #10
    Ringer
    Join Date
    Oct 2012
    Location
    Western New York
    Posts
    673
    Chats: 23

    Default

    As Bill said before if you are looking for a spare ball you might as well just get a plastic ball.

    Getting a misfit would just be adding more hook rather than getting less. It is all about if you can throw it so it doesn't hook. Use the perfect scale on bowlingball.com and you will be bale to compare but if you are just looking for a spare ball just go get a plastic ball.
    Equipment:
    Motiv: Forza, Forza Redine, Venom Shock, Tag
    Storm: Sky Rocket
    Track 100P Spare Ball

    To be drilled: Motiv Jackal

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •