Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: What is "track" and how do I read it?

  1. #1
    Member Bendial's Avatar
    Join Date
    Jan 2013
    Location
    Alameda, CA
    Posts
    88
    Chats: 0

    Default What is "track" and how do I read it?

    Can someone please help me understand what the "Track" is on my ball and how to read it to know if I have a high, low, or medium? Also what is "Flair"?

  2. #2
    Super Moderator
    bowl1820's Avatar
    Join Date
    Dec 2008
    Location
    Central, Florida
    Posts
    6,713
    Blog Entries
    12
    Chats: 554

    Default

    The "Track" is referring to the oil lines you see on your ball after you roll it down the lane. It's where the ball touches the lane as it rolls.

    "Flare" is referring to how much that oil line precess's (moves) around the ball.





    How close the first oil line is to the finger & Thumb holes tells you if you have a high, low, or medium track.

    Basically:
    Low 3" or more away from the holes (axis tilt of 25° or more)
    Medium is about 1" or 2" away from the holes (axis tilt of 10° to 25° or more)
    High is 1" or less (axis tilt of 10° or less)

    Right handed Stroker, high track ,about 13 degree axis tilt. PAP is located 5 9/16” over 1 3/4” up.Speed ave. about 14 mph at the pins. Medium rev’s.High Game 300, High series 798

    "Talent without training is nothing." Luke Skywalker

  3. #3
    Bowling Guru
    Join Date
    Jan 2010
    Location
    Connecticut
    Posts
    3,603
    Chats: 13

    Default

    The track is the area on the ball that comes into contact with the lane as it rolls toward the pins. You can 'read' it by looking at the oil rings on the ball when it comes back. A high track would have the oil rings coming very close to the finger holes. The less axis tilt, the higher the track.

    Flair is change in the track as the ball goes down the lane. On a ball with a symmetric core, there will be little change and the ball may come back looking as if there is a single oil ring marking the track. An asymmetrical core will cause a change in the track and the ball will come back with a numbers of distinct oil lines intersecting in a 'bowtie'. The more the lines diverge, the more flair.
    John

  4. #4
    Ringer Judy clemons's Avatar
    Join Date
    Feb 2013
    Location
    Irving,tx
    Posts
    325
    Blog Entries
    18
    Chats: 67

    Default

    now, that we know what track is and how to read it explain please, what the purpose is in knowing it and how it is used?
    JUDY / JUDY / JUDY...5/24/13 BOWLING RECORD AMF EULESS LANES HG 216 / HS 535
    PIN PALS, "PLEASE, " SPARE ME SOME STRIKES !!!
    I AM A HAPPY...BLESSED...PROUD...MEMBER...BOWLINGBOARDS.C OM

  5. #5
    Member Bendial's Avatar
    Join Date
    Jan 2013
    Location
    Alameda, CA
    Posts
    88
    Chats: 0

    Default

    LOL good reply Judy ;-)

    Thanks everyone else as well for your response! Is the track pretty much always going to be to the left of the finger holes as shown in the diagram (for a right handed bowler)

  6. #6
    Super Moderator
    bowl1820's Avatar
    Join Date
    Dec 2008
    Location
    Central, Florida
    Posts
    6,713
    Blog Entries
    12
    Chats: 554

    Default

    Quote Originally Posted by J Anderson View Post
    The track is the area on the ball that comes into contact with the lane as it rolls toward the pins. You can 'read' it by looking at the oil rings on the ball when it comes back. A high track would have the oil rings coming very close to the finger holes. The less axis tilt, the higher the track.

    Flair is change in the track as the ball goes down the lane. On a ball with a symmetric core, there will be little change and the ball may come back looking as if there is a single oil ring marking the track. An asymmetrical core will cause a change in the track and the ball will come back with a numbers of distinct oil lines intersecting in a 'bowtie'. The more the lines diverge, the more flair.
    it's "Flare" not "Flair"

    "Flair" is A natural talent or aptitude; a knack: a flair for interior decorating. 2. Instinctive discernment; keenness: a flair for the exotica. 3. Distinctive elegance or style: served us with flair.

    As for
    On a ball with a symmetric core, there will be little change and the ball may come back looking as if there is a single oil ring marking the track
    That's not right...
    A symmetrical core can flare just like a asymmetrical core can also, How much would depend on the layout and how many rev's you can put on the ball. (The more revolutions you can create, the more flare you will get.)

    Most all the sym. core balls out now have 6"-"7" of flare. That's not going to look like a single oil ring!
    Last edited by bowl1820; 05-15-2013 at 07:16 PM.

    Right handed Stroker, high track ,about 13 degree axis tilt. PAP is located 5 9/16” over 1 3/4” up.Speed ave. about 14 mph at the pins. Medium rev’s.High Game 300, High series 798

    "Talent without training is nothing." Luke Skywalker

  7. #7
    Bowling God MICHAEL's Avatar
    Join Date
    Apr 2012
    Location
    kansas ctiy missouri
    Posts
    5,433
    Blog Entries
    1
    Chats: 2643

    Default

    Quote Originally Posted by bowl1820 View Post
    it's "Flare" not "Flair"

    "Flair" is A natural talent or aptitude; a knack: a flair for interior decorating. 2. Instinctive discernment; keenness: a flair for the exotica. 3. Distinctive elegance or style: served us with flair.
    As in Iceman,,, Iceman has a Flair for bowling even at the age of ....... Did I say I had a 300 4 weeks ago (
    Last edited by bowl1820; 05-15-2013 at 06:25 PM.

  8. #8
    Cranker ArtVandelay's Avatar
    Join Date
    Nov 2008
    Location
    North Dallas/Ft. Worth, TX
    Posts
    808
    Chats: 19

    Default

    Here's a question:

    Is more flare or less flare better?

    There's a part of me that things if you have less flare, the ball is rolling on a more predictable plane. BUT, then again, perhaps MORE flare exposes more coverstock to the lane and perhaps putting fresh coverstock on the lane helps the ball grip...? hmmm... Interesting!
    Not helping the situation since 1983.


    Bowling Average: 180
    Bowling Handicap: Beer
    Bowling Style: Completely Wheels Off
    Righty / Lefty: Righty
    Bowling Balls: Lane #1 Droid (Strike Ball), Storm Crossroad (Strike Ball. I hate the smell...), Hammer No Mercy (Retired Strike Ball. We had a good run. RIP, old friend!), Ebonite Magnum (Spare Ball), Ebonite Maxim (Spare Ball)
    Best Game: 267
    Best Series: 695 (just 5 more pins... I don't wanna talk about it!)

  9. #9
    Super Moderator
    bowl1820's Avatar
    Join Date
    Dec 2008
    Location
    Central, Florida
    Posts
    6,713
    Blog Entries
    12
    Chats: 554

    Default

    Quote Originally Posted by ArtVandelay View Post
    Here's a question:

    Is more flare or less flare better?

    There's a part of me that things if you have less flare, the ball is rolling on a more predictable plane. BUT, then again, perhaps MORE flare exposes more coverstock to the lane and perhaps putting fresh coverstock on the lane helps the ball grip...? hmmm... Interesting!
    Yes flare exposes more clean/dry coverstock to the lane and that helps the ball grip the lane. that the purpose of flare.

    Is more flare or less flare better? its not a matter of which is better, its about having the right amount on the right conditions.

    you would tend to want more flare on oilier conditions and less on the dryer ones.

    Right handed Stroker, high track ,about 13 degree axis tilt. PAP is located 5 9/16” over 1 3/4” up.Speed ave. about 14 mph at the pins. Medium rev’s.High Game 300, High series 798

    "Talent without training is nothing." Luke Skywalker

  10. #10
    Super Moderator
    bowl1820's Avatar
    Join Date
    Dec 2008
    Location
    Central, Florida
    Posts
    6,713
    Blog Entries
    12
    Chats: 554

    Default

    Quote Originally Posted by Judy clemons View Post
    now, that we know what track is and how to read it explain please, what the purpose is in knowing it and how it is used?
    Knowing how much flare potential a ball has, gives you a idea of the hook potential of the ball. You can then either take advantage of it or reduce it by how you drill the ball.

    Right handed Stroker, high track ,about 13 degree axis tilt. PAP is located 5 9/16” over 1 3/4” up.Speed ave. about 14 mph at the pins. Medium rev’s.High Game 300, High series 798

    "Talent without training is nothing." Luke Skywalker

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •