Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Need help with my technique 2

  1. #1
    Member
    Join Date
    Oct 2012
    Location
    Vilnius, Lithuania
    Posts
    13
    Chats: 0

    Default Need help with my technique 2

    Hi,

    So I'm trying to improve further Here is my another video:

    http://youtu.be/KrLoET0lhIY

    One of my most annoying problems is that my fingers are not under ball's equator prior my release point. When you'll watch my video you'll see that when the ball goes to back swing fingers are more or less in normal position (its only my opinion ). But when the ball comes from back swing fingers are way above ball's equator. I try to keep wrist straight during my swing and I even can feel sometimes that ball weight is transferred to middle and ring fingers. But when I look at video - these fingers are way above equator. My thought is that the wrist is broken because I slightly and not intentionally try to force the ball from the back swing (hope to fix this too). So can anyone show me some kind of drill to develop good fingers position? Or is there any other reason that prevents fingers from required position? I know that I have early wrist turn and I'm trying to get rid of this problem too Thanks.

  2. #2
    Bowling Guru
    Join Date
    Jan 2010
    Location
    Connecticut
    Posts
    3,603
    Chats: 13

    Default

    Quote Originally Posted by rimvydukas View Post
    Hi,

    So I'm trying to improve further Here is my another video:

    http://youtu.be/KrLoET0lhIY

    One of my most annoying problems is that my fingers are not under ball's equator prior my release point. When you'll watch my video you'll see that when the ball goes to back swing fingers are more or less in normal position (its only my opinion ). But when the ball comes from back swing fingers are way above ball's equator. I try to keep wrist straight during my swing and I even can feel sometimes that ball weight is transferred to middle and ring fingers. But when I look at video - these fingers are way above equator. My thought is that the wrist is broken because I slightly and not intentionally try to force the ball from the back swing (hope to fix this too). So can anyone show me some kind of drill to develop good fingers position? Or is there any other reason that prevents fingers from required position? I know that I have early wrist turn and I'm trying to get rid of this problem too Thanks.
    I think that your timing is a little bit late. You are starting the last step before the ball reaches the top of the back swing. Getting the ball into the swing faster or slowing your foot steps should help.
    John

  3. #3
    High Roller striker12's Avatar
    Join Date
    Jan 2012
    Location
    kingston, ontario
    Posts
    2,272
    Chats: 891

    Default

    you timing is way off.

    you dont say how many steps you take but if you take a 5 step approach you should start your swing right when your taking the 2nd step and then you will be at the line at the same time but alittle sweaking you have to do with your speed of your feet to get it right but everything else is good because in the video you are standing there at the foul line waiting for your hand you should get to the foul line 1 second before the ball and thenright when your releaseing your knee should still be coming forward.
    I am a proud member of Bowlingboards.com bowling Forums

    In bag- , storm iq tour pearl , columbia 300 white dot, Brunswick meanstreak brawler, 900 global network, roto-grip rumble, DV8 nightmare


    youth bowling Canada member

    high game: 300
    high series: 699

    this season high Game: 249
    this season high Series: 618

  4. #4
    Member
    Join Date
    Oct 2012
    Location
    Vilnius, Lithuania
    Posts
    13
    Chats: 0

    Default

    Guys,

    I know that my timing needs a little tweaking but it's easier to say than to achieve My approach is four steps approach. I've tried to push the ball earlier, but if I do so everything seems so unnatural for me, it seems that everything go to different directions Also I examined our country champion timing. He is almost the same height as I am. And what I saw is that he has almost the same timing as I am, but with only one difference - fourth step (5 steps approach) is longer than my third step (4 steps approach). My third step seems rather short to me. This lets his ball not to be late. I thought to try to improve my third step. But in other sources I've read that next to last step must be short to achieve powerful slide So what would you recommend to improve my timing - to push ball earlier (feels so unnatural), slow down the steps (I think and feel that I walk rather slow ), something else?

    And you didn't answer to my main question - what forces my wrist to be broken at release point? Is this because that I force a ball a little from a down swing? Something else? As I said I try to keep my wrist as firm as I can, but the result is not as I want.

  5. #5
    High Roller vdubtx's Avatar
    Join Date
    Feb 2013
    Location
    Rockwall, TX
    Posts
    2,802
    Chats: 256

    Default

    Timing can cause a plethora of issues. Late timing can certainly cause you to muscle the ball to catch up which is what I see you doing.

    I have/had the same issue you have with timing and incorporated a push off of the ball first and then get into my steps. I also have 4 step approach with a short(quick) 3rd step. In addition to pushing off the ball, I also took a half step backwards to make myself take a longer step to get to the line.

    You didn't show your ball reaction or anything else, but one other thing I saw is you set your ball down very early, before the line. Get your ball past the line, and, depending on your ball reaction possibly even 2 feet(approx .5 meter) past the line to get the ball rolling a bit later.
    High Sanctioned Scratch Game - 300(12) Hi Sanctioned Scratch Series - 822(3)
    2016/17 Book Average=221, 2017/18 Composite Average=223
    Equipment in the bag - Storm Crux Prime, Storm Physix, Roto Grip Idol, Roto Grip Idol Pearl, Roto Grip Hyper Cell Fused, Storm Sure Lock, Storm Drive, Roto Grip Winner Solid, Roto Grip Haywire, Storm Fever Pitch, Roto Grip Red ball spare.

    Rev Rate 400. Speed 18 at heads, 16.5-17 at pins. Axis tilt 10, Axis Rotation 55. PAP 5 5/8 x 5/8 up

  6. #6
    Member
    Join Date
    Oct 2012
    Location
    Vilnius, Lithuania
    Posts
    13
    Chats: 0

    Default

    Vdubtx,
    Thank you for your valuable input. I think I will try to alter my timing by making longer steps at first. As I said earlier, I've tried to push ball earlier, but it felt so awkward to me and I still was not able to push out earlier. But i'll try again if I'll not find another cure for my timing. My ball hooks but not as much as it can because I lack valuable revs. And because of that I want to have my fingers under equator and want to figure it out why I cant see them in right place I was able to fix my hand overturn a little but I want to improve more And you noticed very well my another problem - I let down the ball a little bit early, but I'm trying to fix this too And when I let down the ball in such way it sounds like I drop it very hard on the lane So as I understood you right - first thing to do is to correct my timing?

  7. #7

    Default

    What I did to try to correct my timing issues was to add an additional step to my approach to get a more natural feel to my push-away/hinge

    I changed to a 5 step and move the ball with my second step.

    So far it is working very well. with the added bonus of adding ~1.5 mph to my ball speed (great for my problem of being rev dominant)

    I'll check the video when I get a chance to comment on the wrist.
    PAP - 6 1/4 1/8 up
    speed 16-16.5 monitor
    ~400-450 revs


    I am a Proud Member of BowlingBoards.com Bowling Forums

  8. #8

    Default

    for the hand position. You're right you start to pull the ball down before it reaches the top of your swing. my guess is you're doing this because you're trying to catch the ball up to where you are in your approach. since you're pulling with your arm when the ball is still moving up it causes your wrist to break back.

    For trying to correct that you have a few options.
    1. work on your timing so you don't have to force the armswing to catch up
    2. keep your hand behind the ball rather that on top in the backswing. this has the effect of keeping the wrist cupped instead of breaking back.

    Either way lead through the swing with your rign finger rather than your thumb/wrist like you do now.

    The best option would be #1 but #2 can work if you just cannot change your approach timing for whatever reason.
    PAP - 6 1/4 1/8 up
    speed 16-16.5 monitor
    ~400-450 revs


    I am a Proud Member of BowlingBoards.com Bowling Forums

  9. #9
    Member
    Join Date
    Oct 2012
    Location
    Vilnius, Lithuania
    Posts
    13
    Chats: 0

    Default

    Perrin,

    I need your opinion what would be the best thing to tweak my timing FOR ME. Look at the another video:

    http://youtu.be/5QhJEg0_l9E

    As i said earlier this video is with our country champion. He is almost the same height as I am. Look at his timing. I think that he has almost the same timing as I am (at least till that time when the ball goes into back swing and past his knees), but with only one difference - fourth step (5 steps approach) is longer than my third step (4 steps approach). And I think that because of that the ball is not too late in his case.

    So what would be better for me - to tweak my timing to his timing, I think this will require less work, or rework my timing from scratch to traditional timing - ball goes to down swing with the right leg when it goes back from the first step? I've tried this timing at home and noticed that in this case I need to add more speed to be in sync with a swing. I don't know if this is good thing

  10. #10

    Default

    I would need to see a video of your full approach in normal speed to give any specific advice for timing
    Last edited by Perrin; 09-18-2013 at 10:36 AM.
    PAP - 6 1/4 1/8 up
    speed 16-16.5 monitor
    ~400-450 revs


    I am a Proud Member of BowlingBoards.com Bowling Forums

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •