Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: The Frantic Hath Risen!!!

  1. #1
    Bowling God Aslan's Avatar
    Join Date
    Aug 2013
    Location
    Hutchinson, KS
    Posts
    7,123
    Chats: 204

    Thumbs up The Frantic Hath Risen!!!

    Below is the Frantic that has returned to life!!



    Short Backstory:
    I was trying to pick up a single 4-7 leave last week during league play, very early in Game 1. I hit the gutter and the ball bounced out and up, hitting the top of the 7-pin, as it collided with the pinsetter. When I went to bowl the next frame, I noticed two very large "smashes" in the ball. I brought it to the front desk but figured it was toast…no way to fix such large and deep holes.

    I then had my Slingshot drilled and practiced with it, expecting to use it this week for league. But, when I got to the lanes last night…the pro in the pro shop said it was done and in the league office. And I'll be DAMNED if it wasn't REPAIRED!!!

    Kind've a bummer that I got the Slingshot drilled and practiced with it…then used the Frantic…because my lines were off and my spare shooting was abysmal. But it appears to roll just fine…nothing noticeable. I still plan to retire it in 3-4 weeks. But I am glad it's useable if for some reason I want to only "semi" retire it and start a little "mini arsenal" or even if I just want to have it for me or friends to use on occasion. AND…it gives me 2-3 more weeks of trying to get a 300-game with it before it gets retired!!
    In Bag: (: .) Zen Master Solid; (: .) Perfect Mindset; (: .) Brunswick Endeavor; (: .) Outer Limits Pearl; (: .) Ebonite Maxim
    USBC#: 8259-59071; USBC Sanctioned Average = 192; Lifetime Average = 172;
    Ball Speed: 14.7mph; Rev. Rate: 240rpm || High Game (sanc.) = 300 (268); High Series (sanc.) = 725 (720); Clean Games: 198

    Smokey this is not 'Nam', this is bowling. There are rules. Proud two-time winner of a bowlingboards.com weekly ball give-away!

  2. #2
    Super Moderator
    bowl1820's Avatar
    Join Date
    Dec 2008
    Location
    Central, Florida
    Posts
    6,713
    Blog Entries
    12
    Chats: 554

    Default

    What in the world?

    Are those two spots filled with clear?

    Right handed Stroker, high track ,about 13 degree axis tilt. PAP is located 5 9/16” over 1 3/4” up.Speed ave. about 14 mph at the pins. Medium rev’s.High Game 300, High series 798

    "Talent without training is nothing." Luke Skywalker

  3. #3
    Ringer
    Join Date
    Nov 2012
    Location
    Hastings, MN
    Posts
    418
    Chats: 0

    Default

    I have absolutely no idea what I am seeing.
    Ball speed: 17 - 18.5 mph Rev rate: 400ish
    PAP 6 1/8" over 1/4" up
    13° axis tilt / 30°-60° axis rotation
    Thumbless bowler
    High game: 300 High series: 804 High average: 217

  4. #4

    Default

    That's scary looking! I would guess that anyone who sees it from a distance will be listening to hear the thumps as it goes down the lane. LOL

  5. #5
    Super Moderator
    bowl1820's Avatar
    Join Date
    Dec 2008
    Location
    Central, Florida
    Posts
    6,713
    Blog Entries
    12
    Chats: 554

    Default

    I'm guessing they drilled out the damaged area and filled it with clear because they didn't think they could match up the colors.

    I would have liked to seen it before the fix. For the before and after look.

    Right handed Stroker, high track ,about 13 degree axis tilt. PAP is located 5 9/16” over 1 3/4” up.Speed ave. about 14 mph at the pins. Medium rev’s.High Game 300, High series 798

    "Talent without training is nothing." Luke Skywalker

  6. #6

    Default

    that is kinda weird looking , looks concave , but hey if it rolls good who cares

  7. #7
    High Roller Stormed1's Avatar
    Join Date
    Sep 2009
    Location
    So. Holland,Il
    Posts
    1,942
    Chats: 221

    Default

    It's nice that they fixed it but they couldc have done a lot better job even if the color was a little off it would look better than that

  8. #8
    Bowling God Aslan's Avatar
    Join Date
    Aug 2013
    Location
    Hutchinson, KS
    Posts
    7,123
    Chats: 204

    Default

    Yes. Thats exactly right. He obviously ground out the holes, smoothed them out, filled them with clear, resurfaced, and polished.

    It DOES look weird…from a distance it looks like there are 4 finger holes drilled in 2 different places. But if you saw it "before", he did a pretty damn good job. I honestly thought the damage was too deep for it to ever be repaired. The holes actually look smaller than what they did the night it happened. But its filled in and smoothed out and other than the "look" is in as good a condition as when I bought it new.

    I have some pictures of it "before" it got damaged, but not at that angle.
    In Bag: (: .) Zen Master Solid; (: .) Perfect Mindset; (: .) Brunswick Endeavor; (: .) Outer Limits Pearl; (: .) Ebonite Maxim
    USBC#: 8259-59071; USBC Sanctioned Average = 192; Lifetime Average = 172;
    Ball Speed: 14.7mph; Rev. Rate: 240rpm || High Game (sanc.) = 300 (268); High Series (sanc.) = 725 (720); Clean Games: 198

    Smokey this is not 'Nam', this is bowling. There are rules. Proud two-time winner of a bowlingboards.com weekly ball give-away!

  9. #9
    High Roller Blacksox1's Avatar
    Join Date
    Dec 2013
    Location
    Coastal Florida
    Posts
    1,672
    Chats: 0

    Default

    After looking at the picture, I had to ask myself, would I bowl in California at this bowling center ? Choices are 1. accidents do happen and yes. 2. no and I am afraid for my equipment. 3. Aslan seems like a stand up guy, I would bowl with him at this center. Provided I won a bowling ball and was going onto Las Vegas for a comped vacation. 4. no no no, but I would like the bowling ball. 5. give your own answer, 20 word max. lol

  10. #10
    High Roller Blacksox1's Avatar
    Join Date
    Dec 2013
    Location
    Coastal Florida
    Posts
    1,672
    Chats: 0

    Default

    Going with 3-3-3-3-3

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •