Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: synthetic vs wood lanes

  1. #11

    Default

    I also noticed that on the wood lanes I was able to pick up at least 90% of my 10 pin spares and 7 pin spares but because my hook has been amplified on the synthetic lanes it was much harder to pick them up.

    I am sure once I have enough practice with them I will find lines that work to pick them up but until then it looks like my views on using a spare ball may have just changed!

  2. #12
    Ringer mike_thomas93's Avatar
    Join Date
    Jul 2013
    Location
    San Antonio, Texas
    Posts
    556
    Chats: 304

    Default

    My home alley is wood, but I've felt preferring bowling on synthetic more. I think I like that better
    My bowling balls include:
    Brunswick Brute Strength, Brunswick Mastermind Genius, DV8 Endless Nightmare, DV8 Diva, DV8 Diva Pearl, DV8 Marauder Mutiny, & Brunswick White Viz-A-Ball spare ball

  3. #13
    High Roller got_a_300's Avatar
    Join Date
    Nov 2011
    Location
    Planet Mars
    Posts
    1,827
    Chats: 4

    Default

    Quote Originally Posted by jnv32185 View Post
    I also noticed that on the wood lanes I was able to pick up at least 90% of my 10 pin spares and 7 pin spares but because my hook has been amplified on the synthetic lanes it was much harder to pick them up.

    I am sure once I have enough practice with them I will find lines that work to pick them up but until then it looks like my views on using a spare ball may have just changed!
    They may have to adjust the oil volume / pattern on the
    new lanes if they haven't done so already. I know on our
    synthetic lanes they can lay down the old wood oil pattern
    on them and you can not hardly keep the ball on the right
    side of the headpin and out of the left side gutter.

    They had to increase the amount of oil that is being applied
    to the synthetic lanes when they were installed several years
    ago. They tried using the same amount / pattern as the wood
    lanes and it was a major no-go at 35 foot and something like
    16 to 18 mil of oil, now it is 41 foot and 28 / 29 mil of oil.
    I am a proud member of Bowlingboards.com bowling Forums
    Right handed, ex-cranker now a power tweener approx. 350 - 400 RPM's PAP 4 1/2" over 1" up high league sanctioned game 300 high league sanctioned series 788
    Bill

  4. #14

    Default

    Back in 1987 when I bowled on synthetics for the first time, my average dropped 15 pins/game! It took me half a season to adjust to the extreme skid on oil and extreme hook on the dry boards. The fact the shot was walled with ZERO oil outside the 10 boards screwed me up most of all. Of course, the rules have changed, so they aren't supposed to do this any more. Of course, there are different types of synthetics, and some are more skid flip than others.

    Until you get a feel for what type of lanes & how they're oiled, you might try a less aggressive ball and a tighter line to control the pocket. Speed control is always important, and on synthetics it's crucial.
    Current arsenal - Columbia 300 White Dot - Columbia 300 Slate Grey U-Dot - Columbia 300 Take Down - Hammer Vibe Envy
    Favorites of the past - Bonanza Yellow Dot(first ball) - AMF Ultra Angle - Several Columbia Blue Dots

  5. #15

    Default

    Quote Originally Posted by CaptainXeroid View Post

    Until you get a feel for what type of lanes & how they're oiled, you might try a less aggressive ball and a tighter line to control the pocket. Speed control is always important, and on synthetics it's crucial.
    I wish I could try a less aggressive ball but I only have one. I was looking into buying a second less aggressive ball around mid season but hoping to get one sooner.

Page 2 of 2 FirstFirst 12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •