Results 1 to 10 of 10

Thread: Nice surprise from Pro-Shop

  1. #1
    High Roller vdubtx's Avatar
    Join Date
    Feb 2013
    Location
    Rockwall, TX
    Posts
    2,802
    Chats: 256

    Default Nice surprise from Pro-Shop

    Went yesterday to buy a new ball that I have been eyeing for drier lane conditions, the Storm Ride. Called first to be sure they had one in 15, they had a few. Gave the driller my drill sheet and pap measurements etc., pin distance I preferred and he started to lay it out.

    Once he drilled it up did a test fit on it and the ball just did not feel right, the cut from middle finger was off 1/32" on middle finger to thumb. He redid the slug but the thumb hole was right up against the hole for the slug, too close I thought. He decided to punch up another one stating that was the first time he had missed.

    When he was finally done with attempt 2, we test fitted and It was perfect. He glued the inserts in and I started to get my cash out, he asked if I had pre-paid and I said I hadn't, he then said this one was on him for missing and taking so long. I protested but he was not having any of it.

    Needless to say I was floored. Did not expect for him to say that, at the least a discount, but not a 100% one.

    Now that I have the money still in my pocket with a new ball in my possession, think it might be time to get a new spare ball.
    High Sanctioned Scratch Game - 300(12) Hi Sanctioned Scratch Series - 822(3)
    2016/17 Book Average=221, 2017/18 Composite Average=223
    Equipment in the bag - Storm Crux Prime, Storm Physix, Roto Grip Idol, Roto Grip Idol Pearl, Roto Grip Hyper Cell Fused, Storm Sure Lock, Storm Drive, Roto Grip Winner Solid, Roto Grip Haywire, Storm Fever Pitch, Roto Grip Red ball spare.

    Rev Rate 400. Speed 18 at heads, 16.5-17 at pins. Axis tilt 10, Axis Rotation 55. PAP 5 5/8 x 5/8 up

  2. #2
    Super Moderator
    bowl1820's Avatar
    Join Date
    Dec 2008
    Location
    Central, Florida
    Posts
    6,713
    Blog Entries
    12
    Chats: 554

    Default

    Okay that was a great deal!

    Right handed Stroker, high track ,about 13 degree axis tilt. PAP is located 5 9/16” over 1 3/4” up.Speed ave. about 14 mph at the pins. Medium rev’s.High Game 300, High series 798

    "Talent without training is nothing." Luke Skywalker

  3. #3

    Default

    Great deal. Comping the drilling would have been great already but free ball also. Very generous but either he is too nice or rolling in the dough

  4. #4

    Default

    That's top of the line customer service, we have gotten so used to being treated like crap by so many people and companies in business transactions it seems strange for people to go to those lengths. While granted he went further than would even be required for it to be considered great service, I'm sure you've already told dozens of people and chances are he will come out with several extra customers.

  5. #5

    Default

    That's awesome, if that were me he'd have a customer for life. Like Tony said, word of mouth can go a really long way (good and bad) especially in a community like bowling.

  6. #6
    Bowling Guru Amyers's Avatar
    Join Date
    May 2014
    Location
    Charleston, WV
    Posts
    3,991
    Chats: 32

    Default

    Wow can't believe he did that my pro shops have done some things I've considered above and beyond but nothing like that cool deal
    I am a proud member of Bowlingboards.com bowling forums and ball contest winner

    Current arsenal

    900 Global Badger Claw - Radical Ridiculous Pearl - Spare Ball Ebonite T Zone

  7. #7

    Default

    Nice, He probably was a little embarrassed over the miss and thought it would save face and make a customer for life and all the word of moth to boot. Have you thrown the new ball yet? Steve

  8. #8

  9. #9
    Banned
    Join Date
    Jun 2012
    Location
    Riverside Ca
    Posts
    2,315
    Chats: 68

    Default

    Quote Originally Posted by vdubtx View Post
    Went yesterday to buy a new ball that I have been eyeing for drier lane conditions, the Storm Ride. Called first to be sure they had one in 15, they had a few. Gave the driller my drill sheet and pap measurements etc., pin distance I preferred and he started to lay it out.

    Once he drilled it up did a test fit on it and the ball just did not feel right, the cut from middle finger was off 1/32" on middle finger to thumb. He redid the slug but the thumb hole was right up against the hole for the slug, too close I thought. He decided to punch up another one stating that was the first time he had missed.

    When he was finally done with attempt 2, we test fitted and It was perfect. He glued the inserts in and I started to get my cash out, he asked if I had pre-paid and I said I hadn't, he then said this one was on him for missing and taking so long. I protested but he was not having any of it.

    Needless to say I was floored. Did not expect for him to say that, at the least a discount, but not a 100% one.

    Now that I have the money still in my pocket with a new ball in my possession, think it might be time to get a new spare ball.
    You probably aren't going to notice 1/32 in span, but if you also have an incorrect pitch, it would feel wrong.

    It's possible he realized it was screwed up more than the 1/32, and had to drill another ball.

    So rather than make your story about how he screwed up, by giving you the ball free, your story focuses on the free ball aspect.

  10. #10
    Ringer Jessiewoodard57's Avatar
    Join Date
    Mar 2015
    Location
    Central Florida
    Posts
    379
    Chats: 0

    Default

    What awesome deal! I just picked my Ride up on Saturday (200 drilled) and love it ....was looking at a hammer but will not buy from EBI again

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •