Try it at 4k first if that doesn't work then 1k or 2k polished. You don't really want to polish a ball with a real fine grit in my opinion.
Well my PSO drilled up my Haywire that I won here on the forum. He set it up to go longer for me the CG is in the middle of my grip and the pin sits over my ring finger. I am not a high speed bowler. I can hit the pocket no problem but it just does not have the punch like my Sinister does. I think it is spending all it's energy before it starts it's roll through the pin deck giving me a lousy pin carry. So here is my question to get it to store more energy for the pins I'm considering taking the surface from the OOB 2000 grit to a 3000 grit and polishing it. Any thoughts? I will wait till after league on Tuesday to be sure the oil volume was not too light because my ball was not showing oil on it's return.
Roto Grip Sinister, Storm 2Fast, Roto Grip Haywire, Storm Joy Ride, Storm Phase, Storm Sky Rocket, Storm Mix, 14#equipment..Disabled bowler bowl from a wheel chair.
I am a proud member of Bowlingboards.com bowling Forums and a ball contest winner!
Try it at 4k first if that doesn't work then 1k or 2k polished. You don't really want to polish a ball with a real fine grit in my opinion.
I am a proud member of Bowlingboards.com bowling forums and ball contest winner
Current arsenal
900 Global Badger Claw - Radical Ridiculous Pearl - Spare Ball Ebonite T Zone
I have my Hammer Badass @4000 with a heavy coat of polish on it
and it almost is still to much ball for a THS with the way I throw it.
I would recomend trying what Amyers said first take it to 4000 and
if it still burns up early then try 4000 with polish and then if it skids
to far then go back to 2000 with polish should be about right then.
I am a proud member of Bowlingboards.com bowling Forums
Right handed, ex-cranker now a power tweener approx. 350 - 400 RPM's PAP 4 1/2" over 1" up high league sanctioned game 300 high league sanctioned series 788
Bill
Thanks for the replies. I bowl tonight so I will wait to change the surface till after I try tonight with league conditions.
Roto Grip Sinister, Storm 2Fast, Roto Grip Haywire, Storm Joy Ride, Storm Phase, Storm Sky Rocket, Storm Mix, 14#equipment..Disabled bowler bowl from a wheel chair.
I am a proud member of Bowlingboards.com bowling Forums and a ball contest winner!
Roto Grip Sinister, Storm 2Fast, Roto Grip Haywire, Storm Joy Ride, Storm Phase, Storm Sky Rocket, Storm Mix, 14#equipment..Disabled bowler bowl from a wheel chair.
I am a proud member of Bowlingboards.com bowling Forums and a ball contest winner!
Good luck hope it works. Just remember as you reduce surface total hook goes down but back end movement increases.
I am a proud member of Bowlingboards.com bowling forums and ball contest winner
Current arsenal
900 Global Badger Claw - Radical Ridiculous Pearl - Spare Ball Ebonite T Zone
Exactly what I need this ball OOB was hitting like a feather duster for me.
Roto Grip Sinister, Storm 2Fast, Roto Grip Haywire, Storm Joy Ride, Storm Phase, Storm Sky Rocket, Storm Mix, 14#equipment..Disabled bowler bowl from a wheel chair.
I am a proud member of Bowlingboards.com bowling Forums and a ball contest winner!
The 4000 grit made the haywire hit much better but something was not right with the lanes. Everyone one of our balls where making unusual moves in the back end. I later found out the whole house was having the same issues. My PSO also bowls league there on Tuesday and he was saying it was not just me that everyone was complaining about the lanes being screwy. I tried going to my Joyride figuring an easy turn at the break point but it turned like it thought it was a Crux! The only ball I could get to settle down was my Hammer Taboo Plastic Spare ball. Not sure if the lane conditioning machine was screwed up or what but we would have bowled better if the lanes where dry. It was one night I wish to forget.
Roto Grip Sinister, Storm 2Fast, Roto Grip Haywire, Storm Joy Ride, Storm Phase, Storm Sky Rocket, Storm Mix, 14#equipment..Disabled bowler bowl from a wheel chair.
I am a proud member of Bowlingboards.com bowling Forums and a ball contest winner!
That sounds like the lane oiling machine had a cleaning issue. That can be from operator error to machine fault. If it's uniform across all the lanes, it's the only thing that makes sense.
Bookmarks