10 pin only
As I mentioned before, I do use plastic for all my single pin spares and most combos that aren't double wood.
I should have mentioned that I used to use it only for right side spares and then used my strike ball with the 3-6-9 on left side. The conditions at the house I bowl at are inconsistent and vary greatly from week to week. I found myself getting into trouble with 3-6-9 on left side with the changing conditions, and would often miss right. I experimented going 4-8-12 but ultimately decided to take lane conditions out of the equation and switch to plastic.
10 pin only
I am a proud member of Bowlingboards.com bowling forums and ball contest winner
Current arsenal
900 Global Badger Claw - Radical Ridiculous Pearl - Spare Ball Ebonite T Zone
I use the same ball i use for strikes, i just dont put any revs on the ball and i throw it straight. I had a plastic ball in the past but prefer this way as I am not lugging around an extra ball just for spares and my spare percentage is the same.
I use my Storm Natural urethane ball for all spares except for ones with double wood.
I have had the same issue the last couple of times out. I have been using plastic ( I am a lefty too) for the 6, 10 as well as the 4, 7. all season and have made most. Missed barely left on two 10's because I believe the oil was heavy in the middle. I may go back to using my strike ball for the right. Good luck to you!
Brian in MI
Last time I used my Ebonite Maxim for a spare my thumb stuck and I launched the ball 25 feet down the lane....... Embarrased to say the least... I need to get the insert reamed
Bookmarks