Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: Is buying a Used ball a option?

  1. #1

    Default Is buying a Used ball a option?

    I am fairly new to bowling and I am looking at buying a ball. I think I am going to get the storm breeze, but is buying a used ball an option I found I nice 15lb ball for 50 dollars. Is buying a used ball a bad idea? I would need to get it plugged and restored.

  2. #2
    Super Moderator
    bowl1820's Avatar
    Join Date
    Dec 2008
    Location
    Central, Florida
    Posts
    6,713
    Blog Entries
    12
    Chats: 554

    Default

    Quote Originally Posted by Hawkeye_2019 View Post
    I am fairly new to bowling and I am looking at buying a ball. I think I am going to get the storm breeze, but is buying a used ball an option I found I nice 15lb ball for 50 dollars. Is buying a used ball a bad idea? I would need to get it plugged and restored.
    Getting a used ball is a option, you just have to weigh the cost of the ball+plugging and drilling etc. against getting something new.

    The Storm Breeze is a fairly low cost ball, you should check the price of a new one(with drilling,grips etc).

    So $50 plus say maybe $40-$50 for plugging and drilling, grips (depending on the proshop). So about approx. $100 for used

    A new Breeze is running around $79 online, so depending on your PSO new might not be that much different.
    Last edited by bowl1820; 11-07-2016 at 01:13 PM.

    Right handed Stroker, high track ,about 13 degree axis tilt. PAP is located 5 9/16” over 1 3/4” up.Speed ave. about 14 mph at the pins. Medium rev’s.High Game 300, High series 798

    "Talent without training is nothing." Luke Skywalker

  3. #3

    Default

    My psi quoted 125new ball drilled etc ect

  4. #4

  5. #5

    Default

    Quote Originally Posted by Hawkeye_2019 View Post
    I am fairly new to bowling and I am looking at buying a ball. I think I am going to get the storm breeze, but is buying a used ball an option I found I nice 15lb ball for 50 dollars. Is buying a used ball a bad idea? I would need to get it plugged and restored.
    Personally, I would go with the new ball. If something happens to it you have a warranty.

    If you get a used one and something happens, now you have to buy a new ball.
    Southern Nevada USBC Board of Directors. DV8 - Thug Unruly, Vandal, Vandal Smash. Pitbull, Brunswick - Ultimate Nirvana, Fanatic BTU, Vintage Danger Zone, Plastic T Zone. Memberships- USBC Southern Nevada - http://www.sonvbowl.com, 9TapTour Las Vegas Region - http://www.9taptour.com, LaneSideReviews, #TeamLSR, #TeamBrunswick

  6. #6
    High Roller got_a_300's Avatar
    Join Date
    Nov 2011
    Location
    Planet Mars
    Posts
    1,827
    Chats: 4

    Default

    Quote Originally Posted by Hawkeye_2019 View Post
    My psi quoted 125new ball drilled etc ect
    That is a decent price as on line it will cost you as much or more I
    priced one of them drilled with no grips and it was still $107+ so
    I'd have to say go ahead and buy it from your PSO.
    I am a proud member of Bowlingboards.com bowling Forums
    Right handed, ex-cranker now a power tweener approx. 350 - 400 RPM's PAP 4 1/2" over 1" up high league sanctioned game 300 high league sanctioned series 788
    Bill

  7. #7

    Default

    Are there other balls I should consider? I am an entry level bowler.

  8. #8

    Default

    Quote Originally Posted by Hawkeye_2019 View Post
    Are there other balls I should consider? I am an entry level bowler.
    As a Brunswick Staffer, I can only recommend the Brunswick family of equipment.

    The Rhino is a very good entry level ball. While it replaced the Strike King, you still might be able to find one out there.

    Beyond that, the step up might be too much until you get more into bowling and get an understanding about cores, cover stocks, etc., because starting with something too strong for your skill level can make things worse.

    I would also suggest getting a coach to improve your game as well.
    Southern Nevada USBC Board of Directors. DV8 - Thug Unruly, Vandal, Vandal Smash. Pitbull, Brunswick - Ultimate Nirvana, Fanatic BTU, Vintage Danger Zone, Plastic T Zone. Memberships- USBC Southern Nevada - http://www.sonvbowl.com, 9TapTour Las Vegas Region - http://www.9taptour.com, LaneSideReviews, #TeamLSR, #TeamBrunswick

  9. #9
    Cranker
    Join Date
    Mar 2016
    Location
    Brandon Florida
    Posts
    868
    Chats: 0

    Default

    I went through the same thought when I came back to bowling 6 months ago. Go with a new one just make sure you are getting the right ball and drilling for you. See if the PSO or someone with knowledge can watch you throw a few. New or old ball if it's not drilled for how you wqant it to react it's not going to work. IMO

    My pro shop sells used ones for 50. drilled. that's where I am getting my spare ball.
    “There’s nothing like throwing a 16lb 8.5 inch sphere at 10 3.5lb wooden objects spaced 12 inches apart and having them all hit each other” proud member of Bowlingboards.com bowling forums and ball contest winner

  10. #10

    Default

    Some of the pro shops around here suggest the Ebonite Cyclone balls to consider for the newer bowler.

Page 1 of 3 123 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •