Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: Bowling tape: Brunswick vs Ebonite

  1. #1

    Default Bowling tape: Brunswick vs Ebonite

    Since I ever started using black bowlers tape I had been using Brunswick for no reason then it was what was available.

    Once I ran out tried to order some more and couldn't find any good deals.

    Someone here had mentioned Ebonite tape saying it was thicker. I ordered a small pack and wow the difference is night and day.

    Brunswick is like electrical tape. Ebonite is twice as thick and doesn't gum up. So when you remove one layer from thumb hole it comes off clean without much resistance or residue.

    Can't believe the difference. You can say I'm converted.

  2. #2

    Default

    Yep! My PSO seldom carries Ebonite, but when I tried it I noticed the difference right away. I order my black tape on-line. Brunswick and Master black tape are very much like electrical tape you can buy at Home Depot or where ever. Ebonite's tape is much easier to work as you slide it into a thumb hole.
    Glad you tried it. I wonder if there will be run on their tape. Maybe I should buy some stock in Ebonite...

  3. #3
    SandBagger
    Join Date
    Apr 2015
    Location
    Lehi, Ut
    Posts
    292
    Chats: 26

    Default

    I've found that both the white and black tapes from Ebi are better than Brunswick and Storm/Master

    Like others have said, they are much easier to insert and remove
    Beyond Revs Pro Shop Staffer. West Valley and Riverton, Utah.
    I am a proud member of Bowlingboards.com bowling Forums. 900Global Inception DCT, Inception Pearl, Honey Badger, Covert Ops, Special Ops, Desert Ops Brunswick Green Quantum Radical Tremendous

  4. #4

    Default

    I still have a stash of white Brunswick tape but don't use white as much so no restocking soon but purchased a 500 batch of black tape so should be good for a while

  5. #5

    Default

    Just an update: Although the Ebonite tape is a lot thicker and easier to remove it also does not stick as well, especially if I have white tape in the thumb hole as well. So I'm going to continue to use both brands as the Brunswick tape is stickier and doesn't peel off where I find myself seemingly always double checking to make sure the Ebonite tape is still there (there have been a few times the tape has flown off after rolling the ball down lane.

  6. #6
    Super Moderator
    bowl1820's Avatar
    Join Date
    Dec 2008
    Location
    Central, Florida
    Posts
    6,713
    Blog Entries
    12
    Chats: 554

    Default

    Quote Originally Posted by NewToBowling View Post
    Just an update: Although the Ebonite tape is a lot thicker and easier to remove it also does not stick as well, especially if I have white tape in the thumb hole as well. So I'm going to continue to use both brands as the Brunswick tape is stickier and doesn't peel off where I find myself seemingly always double checking to make sure the Ebonite tape is still there (there have been a few times the tape has flown off after rolling the ball down lane.
    What Ebonite tape are you referring as to not sticking well and flying off? in the hole or on your thumb?

    I use Ebonite Powerhouse Premium white tape and I've never had a problem with it sticking.

    Right handed Stroker, high track ,about 13 degree axis tilt. PAP is located 5 9/16” over 1 3/4” up.Speed ave. about 14 mph at the pins. Medium rev’s.High Game 300, High series 798

    "Talent without training is nothing." Luke Skywalker

  7. #7

    Default

    I use Ebonite 3/4" black smooth tape for thumb hole. They don't stick as well as Brunswick even though I do like the thickness

  8. #8
    Member
    Join Date
    Jul 2016
    Location
    California
    Posts
    75
    Chats: 0

    Default

    Quote Originally Posted by NewToBowling View Post
    I use Ebonite 3/4" black smooth tape for thumb hole. They don't stick as well as Brunswick even though I do like the thickness
    Try the tiered tape method.

  9. #9
    Super Moderator
    bowl1820's Avatar
    Join Date
    Dec 2008
    Location
    Central, Florida
    Posts
    6,713
    Blog Entries
    12
    Chats: 554

    Default

    Quote Originally Posted by NewToBowling View Post
    I use Ebonite 3/4" black smooth tape for thumb hole. They don't stick as well as Brunswick even though I do like the thickness
    Okay which Ebonite tape is it? Ultra Grip or the Powerhouse Premium?

    The Powerhouse Premium should be the better of the two.

    Right handed Stroker, high track ,about 13 degree axis tilt. PAP is located 5 9/16” over 1 3/4” up.Speed ave. about 14 mph at the pins. Medium rev’s.High Game 300, High series 798

    "Talent without training is nothing." Luke Skywalker

  10. #10

    Default

    Quote Originally Posted by Hawk View Post
    Try the tiered tape method.
    I do. Even with only one in there semetimes it peels off. I help it by contouring the piece and seems to help a bit but I guess with the thickness and firmness of the tape it always wants to go flat.

Page 1 of 3 123 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •