Ball Polish

[santos314]

I bought a bottle of Storm Reacta Shine to try out. How many games can you expect to get out of a single application? I'm sure it varies but does any one have any experience with this stuff?

[Eddy]

Do you have a ball spinner? If not, it probably won't last long. You can only do so good by hand.

[Amyers]

Eddy is correct. Make sure you hit the ball with 1000 grit or 500 preferably with an abaron pad then apply every 6 games or so if doing by hand

[Hawk]

Good afternoon, One thing before you apply the polish soak the ball in some dawn and hot tap water,to get out all the soaked in oil.

[santos314]

Good afternoon, One thing before you apply the polish soak the ball in some dawn and hot tap water,to get out all the soaked in oil.

Thanks! I didnt even think about getting out the oil first.

[santos314]

Eddy is correct. Make sure you hit the ball with 1000 grit or 500 preferably with an abaron pad then apply every 6 games or so if doing by hand

Ok. I dont have a ball spinner but I guess i will give it a try for fun.

[djp1080]

Santos, I've been using Reacta Shine for quite a while now. I use it on Storm's Lights Out, Hy-Road and Byte bowling balls by hand. That's what Storm recommends for these balls. I seldom use any sanding pads on these, but I've used a Food Dehydrator type ball oven on them every now and then. Maybe once or twice a year. The first time I had the Hy-Road sweat oil for about an hour before no more came out. Take a used tee shirt and dampen it a little. Then put some of the polish on the ball. Not too much so that you can cover a third of the cover of the ball and keep rubbing it until the ball is nice a shiny. You'll have fun doing it until your arm gets tired. Do the entire ball. You'll be just fine...
Good luck...

[santos314]

Santos, I've been using Reacta Shine for quite a while now. I use it on Storm's Lights Out, Hy-Road and Byte bowling balls by hand. That's what Storm recommends for these balls. I seldom use any sanding pads on these, but I've used a Food Dehydrator type ball oven on them every now and then. Maybe once or twice a year. The first time I had the Hy-Road sweat oil for about an hour before no more came out. Take a used tee shirt and dampen it a little. Then put some of the polish on the ball. Not too much so that you can cover a third of the cover of the ball and keep rubbing it until the ball is nice a shiny. You'll have fun doing it until your arm gets tired. Do the entire ball. You'll be just fine...
Good luck...

Thanks for the tips, I will give it a go!