
Originally Posted by
djp1080
I take it that you had new finger grips put in. If your eyes are good and the light is excellent into the finger holes, you can take a peek in there and read the number of the grip on the inside of the hole. It works that way for the Vise grips anyway. The sizes are from 0 to 11 in 0.5 increments; however, the number on the inside of the hole is the numerator of the insert size fraction starting with 9/16" with the number 9 and ending with 29 for 29/32. The next to last size is 57 for 57/64ths.
Just check your grip sizes and see what works for you and write them down. Check your other balls to see if they're all the same or not. Good luck!
Bookmarks