https://imgur.com/gallery/2rsSK
Here’s a link to the picture of my bowling ball flare + pin placement. Please let me know what you think.
Thank you
-Chris
Hey guys I recently got a new bowling ball. Brunswick Black Quantum, 15 Pounds. I’ve used it for about 10 or so games now and it’s been messy... It doesn’t hit the pocket and I have to drastically reduce my ball speed to get it anywhere near to the pocket. Any suggestions? My PSO drilled it, but he drilled it in that certain way because he thought I had excessive revs (which I don’t). Once again any suggestions. I’ll post pictures when I’m home.
https://imgur.com/gallery/2rsSK
Here’s a link to the picture of my bowling ball flare + pin placement. Please let me know what you think.
Thank you
-Chris
Right handed Stroker, high track ,about 13 degree axis tilt. PAP is located 5 9/16” over 1 3/4” up.Speed ave. about 14 mph at the pins. Medium rev’s.High Game 300, High series 798
"Talent without training is nothing." Luke Skywalker
Looking at the picture, first off your rolling over your thumbhole and clipping the finger.
Tracking over the thumbhole happens a lot because you turn the ball too early and that moves the track up and onto the thumb hole. Releasing the thumb late also causes the ball to track over the thumb.
Not knowing where your PAP is, the layout looks pretty standard. Pin above ring finger with the CG kicked off to the side a little, It's almost carbon copy of the Brunswick drillsheet Length & Backend layout for a high track.
Which you can see here
http://www.bowlersmart.com/bowling-b...ymmetric_3.JPG
Looking at all the oil on the ball I think you need more surface, To Get it to read the lane a bit earlier.
Right handed Stroker, high track ,about 13 degree axis tilt. PAP is located 5 9/16” over 1 3/4” up.Speed ave. about 14 mph at the pins. Medium rev’s.High Game 300, High series 798
"Talent without training is nothing." Luke Skywalker
This is just a estimate, But at 14 mph with 13 revolutions is in the 250-300 rpm (rev rate) range. That would make you Rev dominate, which I believe is what the PSO meant when he said you had "excessive revs".
Yes, adjusting your surface texture is the first place to start. The OOB is 500 Siaair/Crown Factory Compound, I might would try hitting it with a 2000 pad to knock the polish off. See how it does.
Also look at where your playing the lanes, the kind of line your playing. Plus work on your release.
Right handed Stroker, high track ,about 13 degree axis tilt. PAP is located 5 9/16” over 1 3/4” up.Speed ave. about 14 mph at the pins. Medium rev’s.High Game 300, High series 798
"Talent without training is nothing." Luke Skywalker
I'd agree with bowl adding some surface should help. You may want to move a couple boards right with your feet and target (if your a righty). You maybe gripping the ball to hard causing the late thumb release try to soften your grip pressure some.
I am a proud member of Bowlingboards.com bowling forums and ball contest winner
Current arsenal
900 Global Badger Claw - Radical Ridiculous Pearl - Spare Ball Ebonite T Zone
Bookmarks