It all depends on what final surface you are trying to achieve, whether or not a compound or polish is used.
Most polishes and compounds are just liquid abrasives, your not putting a finishing coat on like with paint. Your just basically sanding the surface to a finer grit surface when you use them.
Let's say your sanding a ball to it's OOB surface, it would depend on what that OOB was.
Example:
A Ebonite Game Breaker 3 OOB is 500/1000 Abralon Polished w/ Powerhouse Factory Finish Polish. That means sand first with a 500 abralon then with a 1000 abralon then finish with polish.
A Storm Hy-Road X OOB is 1500-grit Polished. That means sand first with a 500 pad then 1000 then 2000 then 4000 and finish with Storm Step 2 a compound.
A Brunswick Rhino Red/Black/Gold Pearl OOB is 500 Siaair/Royal Compound/Royal Shine. That means 500 pad then use compound then use polish.
Bookmarks