So my Squatch comes OOB at 500/Crown factory compound/crown factory polish. I have all of the CTD pads and have Motiv polish. I like the OOB finish so want to try to get close to that. Thinking a 3000 CTD might get it close? A fellow bowler said he was leaving corner pins at OOB and hit it with a 4000 and loved it. I'm thinking that would get it close to my BWG at 3000. From what I have read it sounds like the Motiv polish will put it close to 5000?
The ball is still working good so no rush to freshen it but just planning for down the road. I guess worst case I can try 3000 on the spinner and if it isn't enough go 4000 by hand during warm-ups.
Just hit the Conspiracy with 2000 for 10 seconds then 3000 for 5 seconds. It has been too aggressive to use at 2000. Will try it tomorrow in warm-ups.
Arsenal "15# Global Eternity Pi-45x4.5x40" "15# 900 Global Xponent-60x4.5x40" "15# 900 Global Zen Soul-60x4.5x40" "15# Roto Grip Idol Helios-90 x 2.25 x 45" "15# 900 Global Altered Reality-50x3.625x30" "15# Brunswick Uppercut-80x3.625x35" "15# Brunswick Igniter-70x5.5x35" "15# Raw Hammer Pearl 45x5.75x40" "15# Brunswick T-Zone"
Rev Rate about 270 @ about 15.5 MPH at the pins* High Game: 290 - High Series: 733. PAP: 5 1/8"x1" up; tilt 20*, rotation 75*. YTD highs - 290-733
Oh, and LEFTY!!!
Bookmarks