Results 1 to 5 of 5

Thread: Info about clothes dryers

  1. #1
    Super Moderator
    bowl1820's Avatar
    Join Date
    Dec 2008
    Location
    Central, Florida
    Posts
    6,713
    Blog Entries
    12
    Chats: 554

    Default Info about clothes dryers

    I got this in email-

    INFO ABOUT CLOTHES DRYERS
    The heating unit went out on my dryer! The gentleman that fixes things around the house for us told us that he wanted to show us something and he went over to the dryer and pulled out the lint filter. It was clean. (I always clean the lint from the filter after every load clothes.) He told us that he wanted to show us something; he took the filter over to the sink and ran hot water over it. The lint filter is made of a mesh material .. I'm sure you know what your dryer's lint filter looks like. Well .....the hot water just sat on top of the mesh! It didn't go through it at all! He told us that dryer sheets cause a film over that mesh that's what burns out the heating unit. You can't SEE the film, but it's there. It's what is in the dryer sheets to make your clothes soft and static free ... that nice fragrance too. You know how they can feel waxy when you take them out of the box ... well this stuff builds up on your clothes and on your lint screen. This is also what causes dryer units to potentially burn your house down with it! He said the best way to keep your dryer working for a very long time (and to keep your electric bill lower) is to take that filter out and wash it with hot soapy water and an ol d toothbrush (or other brush) at least every six months. He said that makes the life of the dryer at least twice as long! How about that!?! Learn something new everyday! I certainly didn't know dryer sheets would do that. So, I thought I'd share!

    Note: I went to my dryer and tested my screen by running water on it. The water ran through a little bit but mostly collected all the water in the mesh screen. I washed it with warm soapy water and a nylon brush and I had it done in 30 seconds= Then when I rinsed it .. the water ran rig ht thru the screen! There wasn't any puddling at all! That repairman knew what he was talking about!
    Last edited by bowl1820; 04-08-2009 at 01:52 PM.

    Right handed Stroker, high track ,about 13 degree axis tilt. PAP is located 5 9/16” over 1 3/4” up.Speed ave. about 14 mph at the pins. Medium rev’s.High Game 300, High series 798

    "Talent without training is nothing." Luke Skywalker

  2. #2
    Bowler MH1313's Avatar
    Join Date
    Mar 2009
    Location
    Minnesota
    Posts
    133
    Chats: 0

    Default

    wow...we are having trouble with our dryer too...guess I'll check this out tonight!

    Thanks!
    High Game 289 (quite a few)
    High Series 719
    High average 195

    HOLIDAY!!! YOU'RE WEARING YOUR STREET SHOES!

  3. #3
    Cranker Jord_84's Avatar
    Join Date
    Jan 2009
    Location
    Northern Illinois
    Posts
    840
    Chats: 3

    Default

    Good to know!

    thanks for the tip
    High Game-279
    High Series-733
    Righty, Tweener, I proudly use products from Storm, Etonic, and Robby Revs.


    I'm a proud member of BowlingBoards.com Bowling Forums

  4. #4
    Super Moderator
    bowl1820's Avatar
    Join Date
    Dec 2008
    Location
    Central, Florida
    Posts
    6,713
    Blog Entries
    12
    Chats: 554

    Default

    I gave this a try, my filter must be really clean. I didn't have water puddle up. but according to snopes this is basically true, so can't hurt to clean it.

    http://www.snopes.com/inboxer/household/dryer.asp

    Right handed Stroker, high track ,about 13 degree axis tilt. PAP is located 5 9/16” over 1 3/4” up.Speed ave. about 14 mph at the pins. Medium rev’s.High Game 300, High series 798

    "Talent without training is nothing." Luke Skywalker

  5. #5
    Super Moderator

    kev3inp's Avatar
    Join Date
    Sep 2008
    Location
    South Florida
    Posts
    1,314
    Chats: 246

    Default

    Shall we start calling you Heloise? Thanks for the info.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •