I prefer throwing a plastic ball at spares. I can straighten out any of the balls that I own, but why put the extra mileage on a $200 ball?
Hook
Straight
I can still throw my strike ball straight also if I want to but using plastic takes
any and all lane conditions out of play where my strike ball may move 2 or 3 or
more boards when trying to throw it straight on drier conditions the plastic ball
does not move hardly at all.
I am a proud member of Bowlingboards.com bowling Forums
Right handed, ex-cranker now a power tweener approx. 350 - 400 RPM's PAP 4 1/2" over 1" up high league sanctioned game 300 high league sanctioned series 788
Bill
I prefer throwing a plastic ball at spares. I can straighten out any of the balls that I own, but why put the extra mileage on a $200 ball?
Style: Power Stroker/Tweener - 16.5 - 17.5 mph, PAP 4 1/2 x 0
In the bags:
Retooled with 15 lb equipment.
In the Bag: Radical Ludicrous, 900Global Honey Badger Claw, 900Global Honey Badger, DV8 spareball
In the Bullpen : Radical Quick Fix, Radical Katana
The archives: Ebonite Grey Wolf (first 300), Red Wolf (first 700). Just can't let them go.
I am a proud member of Bowlingboards.com bowling Forums
Hooking the ball into the spares is easier for me, seeing as how I can't throw a ball straight to save my life. The only reason I still use my plastic White Dot is because it gets some gentle hook on it which is good in certain situations.
I go straight at spares and have found using plastic I don't need to alter my release nearly as much. By doing so I have figured out how to convert roughly 20% of my 7-10 splits. The more I learned to rev the ball up the harder it became for me to throw my ball straight. Some can, I can't.
i use a entry performance ball to hook the ball alittle to the pins. like with the 10 pin i hook my slingshot to the 10 pin
When shooting spares, you need a shot that increase's the probability that you will convert the spare. You should be able to do both when needed.
As the lanes dry out during league bowling or in a tournament, they will get harder to convert both the right and left side spares. Also when the lanes are very wet, they can also be very difficult to convert the spares using just a hooking ball for a spare shot.
Like shooting the ten pin, The straight Ball cross lane will give you the widest margin of error. Hooking at the ten pin, you need to be a lot more accurate to get the ball to roll into the center of the pin, not just clip it on the side. Because you run the risk of the ball hooking past the pin more often.
Last edited by bowl1820; 03-07-2012 at 01:03 PM. Reason: change wording
Right handed Stroker, high track ,about 13 degree axis tilt. PAP is located 5 9/16” over 1 3/4” up.Speed ave. about 14 mph at the pins. Medium rev’s.High Game 300, High series 798
"Talent without training is nothing." Luke Skywalker
bets thing too do is do streght ball cause then u can have much more accuracy rather thenthrowing it left or right of the spare spare pins and missing andthen blaming it on the ball for not moving in.
another reason why streght shot spares is the best is because you have a much better chance of making splits like the 7-10 or the big 4 cause if you throw a hook ball then you would cut the pins by only hitting 1 maby 2 or missing them all together
I am a proud member of Bowlingboards.com bowling Forums
In bag- , storm iq tour pearl , columbia 300 white dot, Brunswick meanstreak brawler, 900 global network, roto-grip rumble, DV8 nightmare
youth bowling Canada member
high game: 300
high series: 699
this season high Game: 249
this season high Series: 618
You should always throw straight at your spares unless you have a sleeper, 2-4-8-10 (3-6-7-9 for lefties) or you want to throw a strike shot at an 8 pin to figure out your line. Basically, if you had your strike shot figured out you wouldn't be shooting at spares, so why would you throw your strike ball at your spares? Better to go straight at them and take the lane out of play.
My new CD, 'What I'm Made Of' is available now at www.dustinseymour.com, iTunes, Amazon and more!
I'm a bowler and a musician. I have a strong love for both. www.facebook.com/dustinseymourmusic
I am a proud member of Bowlingboards.com bowling Forums.
yeha mayor its is better to throw streght cause then you dont have to worry about missing any pins but you will get that once and awhile cut of a pin form being like 1 board off but thats normal i cut a few pins but only up the left side of the lane on the right i msot of the time miss the 10 but i wif it
I am a proud member of Bowlingboards.com bowling Forums
In bag- , storm iq tour pearl , columbia 300 white dot, Brunswick meanstreak brawler, 900 global network, roto-grip rumble, DV8 nightmare
youth bowling Canada member
high game: 300
high series: 699
this season high Game: 249
this season high Series: 618
Straight is the easiest and safest imho. You can conserve energy and minimize costs too by getting a lightweight plastic ball, which also saves your more expensive equipment. It does not take a 15 or 16 pound ball to knock over a few pins.
By all means, go for the hook if on the safe side of the lane (left hand side pins for a righty), but straight for those on the challenging side. I love the plastic for the 10 pin - I can go hard and straight because it is a lighter ball and be confident it won't curve frustratingly away at the last minute!
It might take a little getting used to if you have done the hook thing on all your deliveries up til now, but over time you will see the rewards.
And of course, there are certain spares where an angle is advantageous to increase your chances of getting the spare so the hook is not going away altogether - especially if you can see that a regular hook ball into the pocket is the best chance to pick it up as well.
ad.
Bookmarks