Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: go ahead and rip it apart

  1. #1
    Bowling God billf's Avatar
    Join Date
    Feb 2012
    Location
    Sidney, Ohio
    Posts
    5,982
    Blog Entries
    1
    Chats: 217

    Default go ahead and rip it apart

    It took me a week tp get it loaded to YouTube, my 12th game of practice this past Saturday. I figured by then I would have slowed down and make the mistakes easier to find. I found about 6 right away.
    USBC SILVER CERTIFIED COACH
    Gold Coach Candidate
    Owner/Operator of Bowlerz Score Coaching
    Tweener Rev Rate of 420, Speed 19 mph
    Key Bowling Staff Member
    Key Bowling Coaching Staff

    IBPSIA member
    Former Staff Bowler at www.BowlerX.com

  2. #2
    Ringer
    Join Date
    Oct 2012
    Location
    Western New York
    Posts
    673
    Chats: 23

    Default

    Shoes not tight enough Bill? Wrong hat?

    I would say knee bend and it looks like at the end you keep looking down at the foul line.
    Equipment:
    Motiv: Forza, Forza Redine, Venom Shock, Tag
    Storm: Sky Rocket
    Track 100P Spare Ball

    To be drilled: Motiv Jackal

  3. #3
    Pin Crusher noeymc's Avatar
    Join Date
    Oct 2012
    Location
    Elyria Ohio
    Posts
    1,370
    Chats: 506

    Default

    ok so ill say some things and u can tell me if u seen the same things your timing is off for like the first min the ball should pass your right leg right as u take ur last step u look a sec behind

    at 1:24 u changed ur axis or the way u thur your ball u where coming over it more


    thats the what i seen
    Last edited by noeymc; 12-14-2012 at 09:28 AM.
    Stroker
    Ball Speed : 17mph Rev Rate : 300-325 PAP : 4 1/2
    Balls : Hammer Taboo Deep Purple Roto Grip Shatter Roto Grip Scream Hammer absolute hook
    Avg 182 high game 291 High series 709
    bowling 2 leagues and everyday i can

    Member ID: 9407-9357

  4. #4
    Ringer
    Join Date
    Jun 2012
    Location
    Maywood, CA
    Posts
    584
    Blog Entries
    1
    Chats: 136

    Default

    Aiming at the wrong board?
    It looks like you are throwing it on the 3rd arrow on the right,
    I am a proud member of Bowlingboards.com bowling Forums
    18 Years Old
    Average : 170
    In bag:-DV8 Reckless, Jet Altitude
    At Home-Hammer Blue Hammer Bowling Ball , Pyramid Path Bowling Ball
    High game-278 1 strike off from a 300
    High series-624 - Shot at tournament 2/22/14

    Bowling Style : 2 Fingers
    Favorite Bowler : Mike Miller

  5. #5
    Bowling God billf's Avatar
    Join Date
    Feb 2012
    Location
    Sidney, Ohio
    Posts
    5,982
    Blog Entries
    1
    Chats: 217

    Default

    Quote Originally Posted by scottymoney View Post
    Shoes not tight enough Bill? Wrong hat?

    I would say knee bend and it looks like at the end you keep looking down at the foul line.
    I was looking down at the foul line. I wasn't sliding and was curious where I was finishing and checking for drift

    Quote Originally Posted by noeymc View Post
    ok so ill say some things and u can tell me if u seen the same things your timing is off for like the first min the ball should pass your right leg right as u take ur last step u look a sec behind

    at 1:24 u changed ur axis or the way u thur your ball u where coming over it more


    thats the what i seen
    I don't see the timing like you do. The ball shouldn't pass as your foot hits the floor on the last step either. Timing wasn't as bad as I expected but looks worse with zero slide

    Quote Originally Posted by martinezsam2495 View Post
    Aiming at the wrong board?
    It looks like you are throwing it on the 3rd arrow on the right,
    It's the angle Sam. The ball was usually going over 12


    1. Lazy balance arm. It wasn't whipping like it does when I'm going good so that results in a loss of leverage. May be due to trying to slow down.
    2. Concentrating on the Mark Baker timing procedure, I forgot to slide.
    3. Too big of a slide step causing a plant. Not sliding reduces your margin of error for timing.
    4. Popping the head up at the line. At times even when I was checking distance to the line and drift.
    5. Chest angled too far down. Have to keep the chest up, head over the knee and toe of slide leg. Too much forward lean leads to inconsistency and loss of leverage.
    6. Not keeping the hand under the ball through the downswing. Doing so flattens the swing adding more margin for error.

    Overall I was bowling like garbage and thought I would share it with the forum. One thing I had hoped to accomplish was figuring out spares with the brace on. It worked as my spare game was much better this week.
    And a thank you to TampaBayBob as I'm wearing steel fingers under that brace. No knuckle pain at all this week using it.
    USBC SILVER CERTIFIED COACH
    Gold Coach Candidate
    Owner/Operator of Bowlerz Score Coaching
    Tweener Rev Rate of 420, Speed 19 mph
    Key Bowling Staff Member
    Key Bowling Coaching Staff

    IBPSIA member
    Former Staff Bowler at www.BowlerX.com

  6. #6
    Bowling Guru
    Join Date
    Jan 2010
    Location
    Connecticut
    Posts
    3,603
    Chats: 13

    Default

    Quote Originally Posted by billf View Post
    2. Concentrating on the Mark Baker timing procedure, I forgot to slide.
    3. Too big of a slide step causing a plant. Not sliding reduces your margin of error for timing.
    4. Popping the head up at the line. At times even when I was checking distance to the line and drift.
    5. Chest angled too far down. Have to keep the chest up, head over the knee and toe of slide leg. Too much forward lean leads to inconsistency and loss of leverage.

    Overall I was bowling like garbage and thought I would share it with the forum. One thing I had hoped to accomplish was figuring out spares with the brace on. It worked as my spare game was much better this week.
    And a thank you to TampaBayBob as I'm wearing steel fingers under that brace. No knuckle pain at all this week using it.
    I was surprised to see you planting, as you had said in an earlier post that you trying to get at least a little bit of slide. I assume that when you're not practicing, but just focusing on making an excellent delivery, you do slide without having to think about it.

    I take it the over long slide step causes your heel to strike the floor first.

    Could item 4 be related to item 5? Subconsciously you know that you're too bent over and pop back up at the end? Or is the popping up a remnant of your cranker style, like the foot plant, that jumps out of the closet when you're focused on something else?
    John

  7. #7
    Ringer
    Join Date
    Nov 2012
    Location
    Hastings, MN
    Posts
    418
    Chats: 0

    Default

    I think one of the easiest ways to learn to slide and also get more drive through the shot is to shorten the pivot step a bunch. Stand up right now and imagine your pivot step just slightly ahead of your left foot. Actually place your right foot just slightly ahead of your left foot. Now get up on your toes on that right foot like you are going to drive forward off it into your slide. Feel how much leverage you have? You can actually feel the power, right?
    Now do the same thing but put the right foot much further ahead of the left foot. Again, go up on your toes on that right foot. You will now feel a total lack of leverage because that foot is WAY forward of your center of gravity. How can you push into a slide from that position? It is pretty hard to do. It is much easier to plant.

  8. #8
    Bowling God billf's Avatar
    Join Date
    Feb 2012
    Location
    Sidney, Ohio
    Posts
    5,982
    Blog Entries
    1
    Chats: 217

    Default

    John, you're probably right about the plant being left over habit from the cranker days. Before I went blind and had to crank, I had no problems sliding at all. Now I have to think about it. The pop up due to the chest being too far forward makes sense. I hadn't thought of that.
    Monday on my first practice throw I slid so far I thought I would easily be over the line but wasn't. It was the first of many pretty shots that day. Amazing what a difference a day can make.

    Sprocket, that's how my pivot step feels...right up until I take that huge step and plant. It's a habit I've been trying to eliminate and thought it was gone until then, when it made an unannounced and unwanted appearance.
    USBC SILVER CERTIFIED COACH
    Gold Coach Candidate
    Owner/Operator of Bowlerz Score Coaching
    Tweener Rev Rate of 420, Speed 19 mph
    Key Bowling Staff Member
    Key Bowling Coaching Staff

    IBPSIA member
    Former Staff Bowler at www.BowlerX.com

  9. #9

    Default

    Footwork has been mentioned. I think part of the problem is towards the top of your backswing. There is some movement there that looks like it could cause some issues. I think it's related, but there's a little skip to your step where you pop up a little during the approach.

  10. #10

    Default

    I'm no expert, but your footwork seems rushed due to late timing. Mark Baker even says in his book that timing that late takes a ton of practice to become consistent. Also, I think Mark's timing spot is dependent on having a strong slide. I plant my left foot a delivery, and as such, I've gone back to a more traditional timing and my scores have improved. I know you said you weren't sliding properly due to focusing on your timing, but I just wanted to add my 2 cents.
    Last edited by Big Nick; 12-20-2012 at 11:44 AM.

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •