I agree with JersyJim, this sounds like another case of how "less can be more" because of the conditions.
You answered the question yourself when you said about Hellraiser & VG, "The ball did hook more initially" then when the line burnt up, it quit working. When that happens, it's time to try a less aggressive ball.
Early loss of bowling ball energy or ball speed, usually happens when you have chosen a ball with a coverstock that is too aggressive for the lane conditions.
Here's a good article that talks about this.
http://www.kegel.net/library/foArticles.asp?iKodYazi=49
So you might try polishing some not just dulling.
Me I think I'd leave the Vibe the way it is, its working ok as is for the drier stuff.
The Virtual Gravity, I'd try going back to the OOB (Out of Box) finish (4000-grit Abralon), then hit it with a little polish or maybe 2000 Abralon followed with a coat of polish. For the mediums/THS.
For the Hell Raiser,I'd have it setup for the oil. The OOB for it is (500; 1,500 Siaair Micro Pad; Rough Buff Finish). Depending on what passes for a lot of oil there. You may have to go to a higher grit 2000-4000 and/or some Rough Buff or Factory finish polish.
Bookmarks